*mynauticexpo

iLineAMP

Product catalog summary

Overview: The iLineAmp by Stella Doradus is designed to work with the iRepeater to enhance cellular signals by an additional 20dB, extending coverage up to 100 meters into buildings or ships. It is a modular system that can be expanded for larger structures.

Specifications:

Models: iL5-EU, iL6-EU, iL5-US
Bands: Various bands for EU and US markets
Ports: 4
Power Supply: 12V, 5A or 7A
Weight: 2.8kg
Dimensions: 43 x 30 x 4.8 cm
Antennas: 4 per unit

Features:

Extends mobile signal by 100m
LCD Touch Display for user interaction
Cloud connectivity for remote management and monitoring
Supports all operators and networks (5G/4G/3G/2G)
Conforms to E.T.S.I specifications

Technical Details:

Coverage: 1000m² per antenna, up to 10 rooms
Gain: 20dB for both uplink and downlink
Pass band ripple: <4dB
I/O Impedance: 50 ohm/SMA female connector
Max signal strength: 0dBm (uplink), 10dBm (downlink)
Operating Temperature: -30°C to +70°C
Power Supply Input: 110 - 240V AC
Automatic Oscillation and AGC Level Control
Surge Protection: SMA connectors DC grounded, 12V DC port MOV protected

Installation and Expansion:

iLineAmps should be installed between the iRepeater and internal antennas
Modular system allows for expansion with up to 16 iLineAmps, supporting 64 antennas
Do not daisy chain iLineAmps; each must connect directly to the iRepeater

Contact Information: Stella Doradus Europe Ltd, Coolfin, Portlaw, Co. Waterford, X91NH59 Ireland. Phone: +353 51 387145, Email: [email protected]

Catalog excerpts

STELLA DORADUS iLineAMP The iLineAmp is used in conjuction with the iRepeater. It boosts cellular signal by an additional 20dB, allowing the repeater system to be extended 100m into the building/ship. It is a modular system, so can be further extended for large buildings / ships.

Open the catalog to page 1

The iLineAmp boosts cellular signal through a coaxial cable, adding 20dB gain to the signal. This extra gain enables the mobile signal to be extended 100m further into the building/ship. The iLineAmp must be installed between the iRepeater and the internal antennas. The iLineAmp can be connected to StellaControl cloud, allowing it to be remotely managed, monitored, and adjusted, as well as receive real-time measurements of signal power, signal gain, plus other metrics for each band. The 4 ports/ 4 indoor antennas per iLineAmp enables coverage into 4 separate areas inside the building/ship. Extends...

Open the catalog to page 2

Check models above for your frequencies LineAmp Specification Coverage Gain (uplink and downlink) Pass band ripple 50 ohm/SMA female connector Max up/down signal strength Ambient Temperature Power supply input Oscillation Control Surge protection SMA connectors DC grounded, 12V DC port MOV protected Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in path loss between the base station and the outdoor antenna. The uplink amplifiers switch off when the repeater is not in use. This reduces the uplink noise to almost zero. When the repeater is in...

Open the catalog to page 3

Cable lengths Side profile left Ethernet Debug Side profile right Outside antenna port Modular system iLineAmps allow the system to be extended for large buildings and ships. In the example below, 4 iLineAmps are installed after the iRepeater to enable the signal deep into the building, giving a total of 16 internal antennas. This modular system can be extended by adding up to 16 iLineAmps using 4 way splitters, allowing 64x antennas to be installed in large multi-story buildings or ships. The iLineAmps must all connect to the iRepeater. They must not be connected to another iLineAmp. Do not...

Open the catalog to page 4

Stella Doradus Europe Ltd, Coolfin, Portlaw, Co. Waterford, X91NH59 Ireland

Open the catalog to page 5

All Stella Doradus catalogs and brochures

RouterAmp
6 Pages
DASMarine
8 Pages
StellaMARINE
5 Pages