Brey-Krause Manufacturing TECHNICAL DATA SHEET 1209 W. Lehigh St., Bethlehem, PA 18018 Phone: 610-867-1401 Fax: 610-866-1433 www.breykrause.com L-1227-LB (6) STEP DOCK LADDER, FRONT MOUNT 3 18 4"q DEEP UPPER RAIL, DETACHABLE FLANGE Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. NON-SLIP SURFACE SCRAP WOOD FOR INSTALL MOUNT SHORT SIDE UP THE UPPER AND LOWER MOUNT KITS INCLUDE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List QTY PART NUMBER DESCRIPTION 2 L-1221-10-LB 18 3/4" C/L UPPER RAIL 1 L-1209-LB UPPER RAIL MOUNTING KIT 1 L-1206-LB 6 STEP LOWER LADDER 1 L-1208-LB LOWER MOUNTING KIT Installation: 1. Install the (2) Mounting Flanges square to the top surface of the dock using the 5 dimension from the front dock mouinting surface, 25 Operation: Only one person at a time should use the ladder. 2. Bolt the upper side rails to the lower ladder assembly and then bolt the upper rails to 1 the mounted flanges. Use a scrap piece of wood (2x4) cut to 23 4 " to support the upper rails while you mount the lower ladder supports. 1 3. Slide the slip support flanges onto the lower ladder mounting posts. Use the 3 4 " dimension as a referance to maintain the ladder plumb. Check the ladder with a level and mount them to the front face of the dock. (Note tthe mounting dimensions on the drawing) The ladder is not to be used as a mooring point for boats or personal watercraft. The mounting bolts used to secure the ladders flanges should be inspected periodically for tightness. ASSEMBLED LADDER WEIGHT: 42 Lbs.