BREY-KRAUSE MANUFACTURING Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. TECHNICAL DATA L-1226-LB (6) STEP DOCK LADDER, FRONT MOUNT 3 18 4"q DEEP UPPER RAIL, WELDED FLANGE 241 2 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com 12 6'-0" DETAIL A SCALE 0.2 : 1 THE LOWER MOUNT KIT INCLUDES MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List PART NUMBER QTY DESCRIPTION 2 L-1221-03-LB 18 3/4" UPPER RAILS, WELDED 1 L-1206-LB 6 STEP LOWER LADDER 1 L-1208-LB LOWER MOUNTING KIT INSTALLATION: 1. Install the (2) upper rail assemblies square to the top surface of the dock using the 5 3 14 32 " dimension from the front dock mounting surface, rail to rail 25 16 " apart to the outside of the flanges. 2. Slide the lower ladder fully into the upper rails and install the bolts. Use a scrap 1 piece of wood (2x4) cut to 23 4 " to support the upper rails while you mount the lower ladder. 3. Slide the slip support flanges onto the lower ladder mounting posts, short end up. 1 Use the 3 4 " dimension as a reference to maintain the ladder plumb.Check the ladder with a level and mount them to the front face of the dock. Check that all bolts are tight. (Note the mounting dimensions on the drawing) Operation: Only one person at a time should use the ladder. The ladder is not to be used as a mooring point for boats or personal watercraft. The mounting bolts used to secure the ladder flanges should be inspected periodically for tightness. Assembled Ladder Weight: 47 Lbs.