BREY-KRAUSE MANUFACTURING Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. UPPER AND LOWER MOUNT KITS INCLUDE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. FRONT MOUNTING SURFACE HARDWARE TO BOLT THE LADDER TO THE DOCK IS NOT INCLUDED. DOCK SURFACE INSTALL LOWER MOUNTS WITH THE SHORT SIDE UP. 6'-19 16 " OVERALL DESCRIPTION UPPER RAIL 4 STEP LOWER LADDER UPPER RAIL MOUNT KIT LOWER LADER MOUNT KIT INSTALLATION: 1. INSTALL (2) MOUNTING FLANGES SQUARE TO THE TOP SURFACE OF THE DOCK USING THE 14 SURFACE. DIMENSION FROM THE FRONT DOCK MOUNTING 2. BOLT THE UPPER SIDE RAILS TO THE LOWER LADDER ASSEMBLY AND THEN BOLT THE LADDER TO THE MOUNTED UPPER FLANGES. 3. SLIDE THE SLIP SUPPORT MOUNTING FLANGES ONTO THE LOWER LADDER 1 MOUNTING POSTS USING THE 3 4 " DIM. AS A REFERANCE TO MAINTAIN THE LADDER PLUMB. CHECK WITH A LEVEL AND INSTALL THEM TO THE FRONT FACE OF THE DOCK. (NOTE THE MOUNTING DIMENSIONS SHOWN.) Only one person at a time should use the ladder. The ladder is not to be used as a mooring point for boats or personal watercraft. The mounting bolts used to secure the ladders flanges should be inspected periodically for tightness. ASSEMBLED LADDER WEIGHT: 32 Lbs. 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com TECHNICAL DATA SHEET L-1221-LB (4) STEP FRONT MOUNT DETACHABLE UPPER