L-1219-LB
1Pages

Catalog excerpts

BREY-KRAUSE MANUFACTURING TECHNICAL DATA SHEET L-1219-LB 6 STEP DOCK LADER, FRONT MOUNT Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. 8"q DEEP UPPER RAIL, DETACHABLE FLANGE NON-SLIP TAPE ON EACH STEP 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com MOUNT SHORT SIDE UP THE UPPER AND LOWER MOUNT KITS INCLUDE THE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List PART NUMBER QTY DESCRIPTION 1 L-1206-LB 6 STEP LOWER LADDER 1 L-1208-LB LOWER MOUNT KIT 2 L-1210-08-LB 8" C/L UPPER RAIL 1 L-1209-LB UPPER RAIL MOUNT KIT INSTALATION: 1) Bolt the upper mounting flanges to the upper hand rails, then bolt the assembled hand rails to the lower ladder, position the ladder in the desired location on the dock. Slide the slip supports onto the lower ladder, check ladder squareness and mark the screw hole positions for the slip supports. OPERATION: Only one person at a time should use the ladder. The ladder is not to be used as a mooring point for boats or personal watercraft. 2) Drill and mount the slip supports (Item 2) to the dock, assuring the proper The mounting bolts used to secure the ladder flanges should be inspected location. Mount (Item 2) short side up for easier fastener installation. (See Detail periodically for tightness. A) Slide the ladder onto the slip supports, check location and assure the ladder is plumb. Assembled Ladder Weight: 46 Lbs. 3) Mark, drill and mount the upper hand rail flanges. Tighten all fasteners.

Open the catalog to page 1

L-1219-LB 1Pages

Catalog excerpts

All Stainless Dock Ladders catalogs and brochures

L-1219-LB
1Pages