Brey-Krause Manufacturing Technical Data Sheet 1209 W. Lehigh St., Bethlehem, PA 18018 Phone: 610-867-1401 Fax: 610-866-1433 www.breykrause.com L-1215-LB (5) STEP DOCK LADDER, FRONT MOUNT Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. 6" q DEEP UPPER RAIL, DETACHABLE FLANGE 90° MOUNT SHORT SIDE UP FRONT SURFACE OF DOCK THE UPPER AND LOWER MOUNT KITS INCLUDE THE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List QTY PART NUMBER DESCRIPTION 1 L-1205-LB 5 STEP LOWER LADDER 2 L-1210-03-LB 6" UPPER RAIL, DETACHABLE 1 L-1209-LB UPPER RAIL MOUNTING KIT 1 L-1208-LB LOWER LADDER MOUNTING KIT Operation: Installation: 1) Bolt the upper mounting flanges (Item 3) to the hand rails (Item 2), Only one person at a time should use the ladder. then bolt the hand rails to the lower ladder. Position the ladder in the desired location on the dock. Slide the slip supports onto the lower ladder The ladder is not to be used as a mooring point for boats or personal and mark the screw hole positions for the slip supports. watercraft. 2) Drill and mount the slip supports (Item 4) to the dock, assuring the proper location. Mount the slip support (Item 4) short side up for easier The mounting bolts used to secure the ladder flanges should be inspected fastener installation. (See Detail A) Slide the ladder onto the slip supports, periodically for tightness. check location and assure the ladder is plumb. 3) Mark, drill and mount the upper hand rail flanges. Check and tighten all Assembled Ladder Weight: 40 Lbs. fasteners.