L-1212-LB
1Pages

Catalog excerpts

BREY-KRAUSE MANUFACTURING 4 STEP DOCK LADDER, FRONT MOUNT Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. 8"q UPPER RAILS, DETACHABLE FLANGES MOUNTING 619 32 NON-SLIP TAPE ON EACH STEP TECHNICAL DATA SHEET L-1212-LB 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com THE UPPER AND LOWER MOUNT KITS INCLUDE THE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. DESCRIPTION 4 STEP LOWER LADDER 8" C/L UPPER RAILS LOWER MOUNTING KIT UPPER MOUNTING KIT INSTALATION: 1) Bolt the upper hand rails to the lower ladder, position the ladder in the desired location on the dock. Slide the slip supports onto the lower ladder, check ladder squareness and mark the screw hole positions for the slip supports. 2) Drill and mount the slip supports (Item 3) to the dock, assuring the proper location. Mount (Item 3) short side up for easier fastener installation. Slide the ladder onto the slip supports, check location and assure the ladder is plumb. 3) Mark, drill and mount the upper hand rail flanges. Tighten all fasteners. OPERATION: Only one person at a time should use the ladder. The ladder is not to be used as a mooring point for boats or personal watercraft. The mounting bolts used to secure the ladder flanges should be inspected periodically for tightness. Assembled Ladder Weight: 35 Lbs.

Open the catalog to page 1

L-1212-LB 1Pages

Catalog excerpts

All Stainless Dock Ladders catalogs and brochures

L-1212-LB
1Pages