BREY-KRAUSE MANUFACTURING 4 STEP DOCK LADDER, FRONT MOUNT Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. 6"q UPPER RAILS, WELDED FLANGES NON-SLIP TAPE ON ALL STEPS TECHNICAL DATA SHEET L-1210-SS 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com MOUNT SHORT SIDE UP. THE LOWER MOUNT KIT INCLUDES THE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List PART NUMBER QTY DESCRIPTION 1 L-1204-LB 4 STEP LOWER LADDER 2 L-1210-06-LB 6" C/L RAILS, WELDED 1 L-1208-LB LOWER MOUNTING KIT Only one person at a time should use the ladder. 1) Bolt the upper hand rails to the lower ladder, position the ladder in the desired location on the dock. Slide the slip supports onto the lower ladder, check The ladder is not to be used as a mooring point for boats or personal ladder squareness and mark the screw hole positions for the slip supports. watercraft. 2) Drill and mount the slip supports (Item 3) to the dock, assuring the proper location. Mount (Item 3) short side up for easier fastener installation. Slide the ladder onto the slip supports, check location and assure the ladder is plumb. The mounting bolts used to secure the ladder flanges should be inspected periodically for tightness. 3) Mark, drill and mount the upper hand rail flanges. Tighten all fasteners. Assembled Ladder Weight: 35 Lbs.