- Catalogs
- Stainless Dock Ladders
- L-1201-LB
L-1201-LB
L-1201-LB
- 3 Step Lower Ladder (Part Number: L-1203-LB) - Quantity: 1
- 6" C/L Upper Rails (Part Number: L-1210-03-LB) - Quantity: 2
- Lower Mounting Kit (Part Number: L-1208-LB) - Quantity: 1
- Upper Mounting Kit (Part Number: L-1209-LB) - Quantity: 1
- Bolt the upper mounting flanges to the upper handrails, then attach the assembled handrails to the lower ladder. Position the ladder on the dock, slide slip supports onto the lower ladder, check for squareness, and mark screw hole positions for the slip supports.
- Drill and mount the slip supports to the dock, ensuring proper location. Mount with the short side up for easier fastener installation. Slide the ladder onto the slip supports, check location, and ensure the ladder is plumb.
- Mark, drill, and mount the upper handrail flanges. Tighten all fasteners.
- Only one person should use the ladder at a time.
- The ladder should not be used as a mooring point for boats or personal watercraft.
- Inspect the mounting bolts periodically for tightness.
- Assembled Ladder Weight: 30 lbs
- Non-slip tape is applied on each step for safety.
Catalog excerpts
BREY-KRAUSE MANUFACTURING 6"q UPPER RAIL, DETACHABLE FLANGE NON-SLIP TAPE ON EACH STEP 3 STEP DOCK LADDER, FRONT MOUNT Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. TECHNICAL DATA SHEET L-1201-LB 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com THE UPPER AND LOWER MOUNT KITS INCLUDE THE MOUNTING FLANGES AND ALL NECESSARY HARDWARE FOR ASSEMBLING THE LADDER. HARDWARE TO MOUNT THE LADDER TO THE DOCK IS NOT INCLUDED. Parts List PART NUMBER QTY DESCRIPTION 1 L-1203-LB 3 STEP LOWER LADDER 2 L-1210-03-LB 6" C/L UPPER RAILS 1 L-1208-LB LOWER MOUNTING KIT 1 L-1209-LB UPPER MOUNTING KIT INSTALATION: 1) Bolt the upper mounting flanges to the upper hand rails, then bolt the assembled hand rails to the lower ladder, position the ladder in the desired location on the dock. Slide the slip supports onto the lower ladder, check ladder squareness and mark the screw hole positions for the slip supports. 2) Drill and mount the slip supports (Item 3) to the dock, assuring the proper location. Mount (Item 3) short side up for easier fastener installation. Slide the ladder onto the slip supports, check location and assure the ladder is plumb. 3) Mark, drill and mount the upper hand rail flanges. Tighten all fasteners. OPERATION: Only one person at a time should use the ladder. The ladder is not to be used as a mooring point for boats or personal watercraft. The mounting bolts used to secure the ladder flanges should be inspected periodically for tightness. Assembled Ladder Weight: 30 Lbs.
Open the catalog to page 1All Stainless Dock Ladders catalogs and brochures
L-1120-LB1 Page
L-1130-LB1 Page
L-1140-LB1 Page
L-1150-LB1 Page
L-1200-LB1 Page
L-1210-SS1 Page
L-1211-LB1 Page
L-1212-LB1 Page
L-1215-LB1 Page
L-1216-LB1 Page
L-1218-LB1 Page
L-1219-LB1 Page
L-1221-LB1 Page
L-1222-LB1 Page
L-1226-LB1 Page
L-1227-LB1 Page
L-1310-LB1 Page
L-1320-LB1 Page
L-0715-SS1 Page
DOCK GRAB BAR1 Page
L-1100-LB1 Page
L-0710-SS1 Page
L-0706-SS1 Page