BREY-KRAUSE MANUFACTURING 7 STEP DOCK LADDER, TOP MOUNT 181 2"q UPPER RAILS Brey-Krause Mfg. reserves the right to make changes in design and/or materials without formal notice and without incurring obligation. Bolts shown are for reference only. Hardware for mounting the upper rail(s) to the dock is not supplied. Use Ø3/8" hardware suitable to the dock material or applicable codes. ANTI-SLIP SURFACE ON EACH STEP. TECHNICAL DATA SHEET L-1140-LB 1209 W. LEHIGH ST., BETHLEHEM, PA 18018 PHONE: 610-867-1401 FAX: 610-866-1433 www.breykrause.com Parts List PART NUMBER QTY DESCRIPTION 1 L-1110-70-LB 7 STEP LOWER LADDER 2 L-1130-35-LB 18-1/2" C/L UPPER RAILS 1 L-1100-50 LOWER HARDWARE BOLT KIT OPERATION: INSTALATION: The ladder is shipped in (3) pieces; (2) upper railings (L-1130-35-LB), the Only one person at a time should use the ladder. lower ladder section (L-1110-70-LB) along with the Bolt Kit (#L-1100-50). The ladder is not to be used as a mooring point for boats or personal watercraft. Mount the two upper rails to the dock (22" apart) using the lower as a positioning guide. Then install the lower ladder section to the upper rails The mounting bolts used to secure the ladder flanges should be inspected using the supplied hardware. Reference the mounting dimensions. periodically for tightness. Mounting holes are sized for Ø3/8" hardware supplied by the customer to Assembled Ladder Weight: 53 Lbs. suit the surface being mounted to. Follow all applicable building codes.