Catalogs >
Sperry Marine >
Gyrocompass_NAVIGAT_X_MK_2

Gyrocompass_NAVIGAT_X_MK_2
1 / 4Pages

Catalog excerpts

NORTHROP GRUMMAN Digital Gyrocompass System

NAVIGAT X MK 2 Digital Gyrocompass System OVERVIEW Standard Version The Sperry Marine NAVIGAT X MK2 digital marine gyrocompass system provides accurate North-speed error-corrected true heading as well as rate-of-turn data under all operating conditions and is a costeffective solution for all international carriage requirements. The NAVIGAT X MK 2 gyrocompass is a compact, one-unit design that runs on a 24-volt power supply with two independent DC inputs. It can drive up to four analogue repeaters and provides five additional serial data outputs and one six-steps/degree output. Based on the...

Open the catalog to page 2

Electronic Compass Transmitting Magnetic Compass (TMC) Version NAVITWIN IV Heading Management System Heading Diff Alarm Off Heading Alarm JUPITER Magnetic Compass with Flux Gate Speed: 1 input IEC 61162-1 or 200 pulses/nm Steering mode status: 1 input Man/Auto from selector Alarm mute: 1 input from external control Power Main power supply: 18 VDC - 36 VDC Backup power supply: 18 VDC - 36 VDC Outputs Switch-Over Unit 4 outputs NMEA TTL: gyrocompass heading, rate of turn, heading reference status to compass repeaters 1 output Sensor Data 1 RS 422: gyrocompass heading, rate of turn, heading...

Open the catalog to page 3

MAIN FEATURES ACCESSORY EQUIPMENT data • Permanent storage of operational elapsed (gyrosphere current, temperature, operation time) • Over 250 Sperry Marine service locations worldwide POWER CONSUMPTION Start-up Steering repeater compass for console mounting with 360° and 10° compass cards Weight: 1.5 kg Each repeater (analogue) Prismatic azimuth device PV 23 Weight: 1 kg 6W Bearing repeater compass with 360° card in a stand with azimuth device PV 23 Total weight: 16.1 kg DIMENSIONS AND WEIGHT Width Console repeater compass with 360° card Weight: 1.5 kg NAVIPRINT Navigation Data Printer...

Open the catalog to page 4