Specifications:
- The latch and roller shaft body are made of 316 grade stainless steel, polished for a premium finish and corrosion resistance. The keeper roller and spacer are made of black nylon, while the cam, mounting plate, and guide ring are made of 304 stainless steel, polished. The screws, roller support, and nuts are made of 304 stainless steel, passivated.
- The T-handle housing is made of 304 stainless steel, electropolished, with a spring, weld cover, and bearing also made of 304 stainless steel.
- Part numbers: Latch assembly is E5-70-1627-701 and T-handle Key is E3-13-4.

Procedures:
- For operation, push the T-handle button and insert it into the housing. Release the button and slightly rotate the T-handle until it is secured into the housing.

Performance Details:
- Maximum static load is 160 N (36 lbs).
- T-handle pull-out force is 2200 N (495 lbs).

Panel Preparation:
- The top of the latch is flush with the top of the panel. The door thickness should be between 12.7 mm (.5 inches) to 19.5 mm (.75 inches). The grip range is from 40.2 mm (1.58 inches) minimum to 46.6 mm (1.83 inches) maximum.
- Drill size to accommodate hardware used is Ø 15.9±0.1 mm (.625±.004 inches). Screws are not supplied, but M4 or No. 8 are recommended.

Design Features:
- The removable handle design helps control access and the flush exterior is suitable for floor latch applications.

Contact Information:
- Southco Marine USA: 501 Haverty Court, Suite J, Rockledge, FL 32955 USA. Tel: (1) 321 638 4990, Fax: (1) 321 638 4979, Email: [email protected]
- Southco Marine, Sweden: Southco AB, Box 92, SE-631 02 Eskilstuna, Sweden. Tel: 46 16 42 86 80, Fax: 46 16 42 86 97, Email: [email protected]