DECK FILLS & TANK VENTS STANDARD DECK FILLS • 316 stainless steel construction • Flush profile • Color coded graphics POP-OUT DECK FILLS • 316 stainless steel construction • Flush profile • Color coded graphics • Available with security key locking COVERED DECK FILLS • 316 stainless steel construction • Cover conceals mounting hardware • Color coded graphics VENTED DECK FILLS • Available in 316 stainless steel or nylon body with stainless steel • Innovative design requires a single mounting hole • No need for external vent FLUSH TANK VENTS • Low profile tank vent with easy tank pressure test • Available with straight or • Available with stainless steel or nylon mounting hardware • Tank vent accessory available for a quick 90 degree turn DECK FILLS AND TANK VENTS ACCESSORIES • The following table provides an overview of all replacement parts for Deck Fills and Tank Vents offered www.southco. com/Ml Dimensions In millimeters (Inch) unless otherwise stated

STANDARD DECK FILLS • Features a spring loaded stainless steel cap retention cable • Color-coded international symbol with engraved lettering • 1-7/8" installation hole required for the 1-1/2" fill • 2-1/8" installation hole required for the 2" fill www.southco. com/Ml Dimensions In millimeters (Inch) unless otherwise stated

POP-OUT DECK FILL • Pop-out center on cap for easy keyless operation • Available with keyed or standard cap • Features a spring loaded stainless steel cap retention cable • Color-coded international symbol with engraved lettering • 1-7/8" installation hole required for the 1-1/2" fill • 2-1/8" installation hole required for the 2" fill FULL COVER DECK FILL • All stainless steel construction. Features an easy grip cap with simple adjustment of orientation after final installation • Features a spring loaded stainless steel cap retention cable • 1-7/8" single installation hole is required, 5/8"...

90° FLUSH TANK VENT • Unique design allows recessed flush mounting in the hull or cabin sides, protecting the vent body • Modern attractive appearance and high airflow capacity • Barb up installation to prevent tank contamination • Deep or shallow cup provides for installation in material thickness up to 33mm (1-5/16": STRAIGHT FLUSH TANK VENT • Straight angle design • Unique design permits recessed flush mounting in the hull or cabin sides, protecting the vent body • Attractive appearance and high airflow capacity Dimensions in millimeters (Inch) unless otherwise stated

126 DECK FILLS & TANK VENTS NYSTEEL TANK VENT • 316 stainless steel body with nylon cup and nut • Flushed installation • Removable cap and test fitting allow for quick and easy fuel system pressure check • Suitable for 4-28mm material thickness • Same face size for 16mm (6/8”) and 19mm (3/4”) barb fitting D D C E B A Part No A mm B mm C mm D mm E Max. M7-20-9504835 16 (5/8”) 71 (2 13/16) 38 (1 1/2”) 48 (1 7/8”) 19 (3/4”) 90° STALON THRU HULL TANK VENT • Nylon body with 316 stainless steel cap • 90° angle design • Comes with a stainless steel integral screen D C E B A Part No B mm C mm D mm E...

127 DECK FILLS & TANK VENTS STALON TANK VENT • 316 stainless steel body with nylon cup and nut • Available in straight or 90° angle design • Various cup sizes and depths allow for installation in different material thickness • Match with the Southco stainless steel thru hull design • Comes with stainless steel integral screen D D C D C E E B B A Part No Model A mm B mm C mm D mm E mm M7-20-9106353 M7-20-9106364 Straight 90° 16 (5/8”) 16 (5/8”) 76 (3”) 70 (2 3/4”) 35 (1 3/8”) 35 (1 3/8”) 45 (1 3/4”) 45 (1 3/4”) 18 (3/4”) 16 (5/8”) A 90° STALON TANK VENT • Nylon body with 316 stainless steel cup...