*mynauticexpo

Catalogs
Southco
C7 Draw Latch

C7 Draw Latch

Product catalog summary

Overview: The document provides technical specifications for the C7 Draw Latch, highlighting its flexible, over-center, low-profile design made from non-corrosive materials. It is designed to cushion impact and accommodate misalignment.

Material and Finish: The latch is made from a black thermoplastic elastomer, while the link and bushings are constructed from glass-reinforced nylon. The keeper and bracket are made of stainless steel.

Performance Details: The latch is available in two sizes: small and large. The small size offers a clamping force of 49 N (11 lbf), and the large size provides a clamping force of 176 N (40 lbf). Both sizes have a flammability rating of UL94-HB.

Installation Notes: For the small size, the assembly requires four Ø 4 (.170) rivets or M4 (No. 8) screws, which are not supplied. The large size requires four Ø5 (.204) rivets or M5 (No. 10) screws, also not supplied.

Part Numbers: The document lists part numbers for different keeper styles:

Small Concealed: C7-10
Small Reverse Keeper: C7-11
Small Right Angle Keeper: C7-12
Large Concealed: C7-20

Dimensions: Detailed dimensions are provided for both latched and unlatched states, as well as for different keeper styles (concealed, reversed, right angle). Measurements are given in both millimeters and inches.

Additional Information: The document includes diagrams with precise measurements for installation and assembly, ensuring proper fit and function.

Catalog excerpts

Flexible · Over-center • Low profile design • Non-corrosive materials • Cushions impact and accommodates misalignment Reversed keeper Right angle keeper Concealed Keeper Concealed keeper Latch assembly ACTUAL SIZE Latch Assembly 164 (6.45) Latched 15.1 (.60) Bracket Large: Clamping force: 176 N (40 lbf) For concealed keeper Latch For reversed keeper Latch Performance Details Small: Clamping force: 49 N (11 lbf) Latch: Thermoplastic elastomer black Link and bushings: Glass reinforced nylon Keeper and bracket: Stainless steel ACTUAL SIZE Keeper Installation Notes Small: Install assembly with four Ø 4 (.170) rivets or M4 (No. 8) screws (not supplied) Large: Install assembly with four Ø5 (.204) rivets or M5 (No. 10) screws (not supplied) For right angle keeper 17.5±0.1 (.688±.005) 72±3 (2.82±.12) Ø 4.3 -0.0 (.170 +.003 ) -.001 Four holes Latch sub-ass'y mounting holes Part Number Keeper Style Assembly Part Number Reverse Keeper Right Angle Keeper Assembly complete with keeper Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 1

C7 Draw Latch

C7 Draw Latch

Catalog excerpts

All Southco catalogs and brochures

Archived catalogs