Catalogs >
Southco >
AV - Tilt Mount (T Series)

AV - Tilt Mount (T Series)
4Pages

Catalog excerpts

AV Series Dynamic Mount Tilt Product Detail • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Precise control of operating effort ensures ideal “feel” Holds securely, even in applications with dynamic loading • Consistent repeatable operation • Fully enclosed for optimum cleanability 4 X M5 X 0.8 Reverse 10mm Full Thread Display Tilt ±200 range of motion from position shown 1. Determine desired mounting location 2. Attach using M5 X 0.8 screws as shown Caution: Because of the wide variety of available wall materials, it is the installer’s responsibility to ensure that the materials, and structure to which the tilt mount is fastened will provide adequate support. 3. Attach display using manufacturer’s recommended hardware Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 1

AV Series Dynamic Mount Tilt • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. Material and Finish Aluminum alloy, powder coated Display Weight Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Max. dynamic working load: Model 101 and 103: 70N (15.7lbf) Model 102: 100N (22.5lbf) Average ultimate load: 1845N (414.8lbf) Part Number Part Number Example Display mounting surface to CG distance cm...

Open the catalog to page 2

AV Series Dynamic Mount Tilt Product Detail • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Robust positioning in compact package Holds securely, even in applications with dynamic loading Forward Torque Reverse Torque • Consistent repeatable operation • Fully enclosed for optimum cleanability Installation 1. Determine desired mounting location 2. Attach using M6 screws as shown Caution: Because of the wide variety of available materials, it is the installer’s responsibility to ensure that the materials, and structure to...

Open the catalog to page 3

AV Series Dynamic Mount Tilt • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. Step 2 Use chart below to select model part number. Steel, Aluminum Alloy, Powder Coated Display Weight Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Max. dynamic working load: 100N Average ultimate load: 1065N Part Number Display mounting surface to CG distance - cm AV-D25 T-Series Model Selection Guide Step 3...

Open the catalog to page 4