*mynauticexpo

Catalogs
Southco
AC - Cables

AC - Cables

Product catalog summary

Overview: This document provides detailed specifications and guidelines for selecting and assembling cable assemblies, focusing on dimensions, materials, and part number configurations.

Specifications:

Dimensions are provided in millimeters (inches) unless otherwise stated.
Cable materials include stainless steel for the cable, acetal for the liner, and polypropylene for the jacket.

Part Number Selection:

Spring Option (S): 0 for without spring, 1 for with spring (rotary end only).
Cable Length (L): Must be specified in 4 digits (e.g., 0250 for 250mm).
Cable Type (Y): Types range from 1 to 7, with specific instructions for omitting certain numbers in part numbers.
Actuator Fitting Type (A) and Rotary Latch Fitting Type (R): Refer to respective tables for options.

Material and Finish:

Cable: Stainless steel
Liner: Acetal
Jacket: Polypropylene

Fitting Types:

Various fitting types are available, including barrel, L, Z, eyelet, ball, threaded, and bare cable, each with specific material compositions.

Actuators and Rotary Latches:

Different actuator and latch models are specified, with some requiring specific cable types (e.g., AC-10 and AC-75 must use Type 6 or 7 cables).

Dimensional Tolerances:

Specified tolerances for cable lengths and protrusions, varying by length category.

Notes:

Minimum cable length is 115mm.
Various cable types are detailed, each with specific part numbers and configurations.

Accessories:

Includes retainer clips and cable mounting brackets, with specific part numbers and material details.

Catalog excerpts

Cable Assembly • onnecting actuators with C rotary latches • Standard offering of cable assemblies Cable Assembly Part Number Selection S Spring Option (Rotary End Only) (See page XXX) A Actuator Fitting Type (See Acuators Table below) Material and Finish Cable: Stainless steel R Rotary Latch Fitting Type (See Rotary Latches Table below) Liner: Acetal L Cable Length (mm) Length in mm is defined on next page. Must be 4 digits. Example: 250mm, L = 0250 Y Cable Type (See next page, types 1 - 7) Please omit -048 from part number when using cable type 1 or 2. Jacket: Polypropylene Fitting Type Barrel Fitting Eyelet Fitting Ball Fitting Threaded Fitting Bare Cable Plated Steel Plated Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel AC-30 Page 266 Barrel Fitting Eyelet Fitting AC-M1 Page 271 FMVSS Compliant Bare Cable * C-10 and AC-75 must use A Type 6 or 7 Cable E5 Page 128 Bare Cable Dimensions in millimeters (inch) unless otherwise stated Electronic Access Rotary Latches R4-EM Page 32 Ball Fitting

Open the catalog to page 1

• or full product F specifications on cable assemblies, refer to trade drawing J-AC-C. L ±2.3 (611 to 1220)610) ±1.5(up to L L ±1.5(up ±3.2 (1221 to 2540)1220) to 610)±2.3 (611 to ±1.5(up ±1.5(up to 610) 2540) ±2.3 (611 toto 610) (1221 to 2540) 1220) ±4 ±3.2 (over ±2.3 (611 to 1220) ±2.3 (611 to 1220) ±3.2 (1221 to 2540)±4 (over 2540) ±3.2 (1221 to 2540) (1221 to 2540) ±3.2(over 2540) ±4 ±4 (over 2540) L L ±4 (over 2540) ±1.5(up to 610) ±1.5(up to 610) ±2.3 (611 to 1220) ±2.3 (611 to 1220) Minimum cable length = 115mm (4.5) ±3.2 (1221 to 2540) ±3.2 (1221 to 2540) L ±4 (over 2540) ±4 (over 2540)...

Open the catalog to page 2

Cable Assembly S Spring Option (Rotary Side Only) 0 Without Spring 1 With Spring 0 Without Spring Actuator End (Option A shown) L = 0250, L = 250mm Cable Part Number Example: AC-CAB0-3-0250-048 1 With Spring Optional Spring (to ensure cable reset) Actuator End (Option A shown) K = 184.8mm L = 0250, L = 250mm Cable Part Number Example: AC-CAB1-3-0250-048 Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 3

Cable Accessories Retainer Clip • or use with Ø 4 (.157) F rod or Southco cable assembly Clip: Acetal Latch Series R4-10 R4-30 R4-20 R4-50 Panel Prep Part Number Acetal, Black Acetal, White Hole Diameter Panel Thickness Bracket: Steel Part Number See table Cable Mounting Bracket 28.1 (1.11) Part Number Actuator Assembly Retainer Clip Mounting Bracket Mounting Screws Cable mounting bracket (1/8” Mounting screws not included) Other options available. For complete details on variety, part numbers, installation and specification, go to Door thickness (See part number builder) Ø 44 Dimensions in millimeters...

Open the catalog to page 4

AC - Cables

AC - Cables

Catalog excerpts

All Southco catalogs and brochures

Archived catalogs