Specifications:
The marine generator model 45 GT/GTC is a three-phase generator with a maximum power output of 36 kW (45 kVA) and a prime power of 32.7 kW. It operates at a frequency of 50 Hz and a voltage of 400/230 V, with an amperage of 65 A. The generator is available with or without a canopy, affecting its dimensions and weight. Without a canopy, it measures 1428 mm in length, 740 mm in width, and 785 mm in height, with a dry weight of 560 kg. With a canopy, the dimensions are slightly larger, and the weight increases to 598 kg.

Engine Details:
The generator is powered by a Mitsubishi SM-56 GENSET diesel engine, featuring a 4-stroke, 4-cylinder configuration with a total displacement of 3331 cc. It operates at 1500 RPM and has a power output of 40.5 kW. The engine includes a turbocharged intake system, a mechanical and direct injection system, and a wet exhaust elbow with a diameter of 94 mm. The engine's oil capacity is 10 L, and it has a coolant capacity of 13 L.

Fuel System:
The generator uses diesel fuel, adhering to ASTM standards. Fuel consumption varies with load, ranging from 3.2 l/h at 25% load to 9.7 l/h at full load. The fuel system includes an in-line injection pump and a mechanical governor.

Electrical System:
The generator's electrical system operates at 12 V, with a starter motor power of 2.2 kW. It includes an alternator with a 50 A output and optional IP 65 box kit. The system is earth isolated and includes current transformers.

Installation Details:
The generator requires specific hose diameters for exhaust, sea water, and fuel lines. It has a maximum fuel lift height of 0.3 m and a maximum raw water lift height of 2.5 m. The installation angle should not exceed 15 degrees in any direction.

Alternator Details:
The alternator is a Meccalte ECP32 1M 4 C model with a DSR regulator type. It features a brushless excitation system and is tropicalized. The alternator complies with EN60034-1 and IEC 60034-1 standards.

Standard Equipment and Optional Accessories:
Standard equipment includes an earth isolated system, an amperometric transmitter kit, and a control panel. Optional accessories include a siphon break kit, service kits, and various exhaust and water systems.

SCO 11 Panel:
The SCO 11 panel features a graphic LCD display, genset measures, and alarm management. It supports multiple languages and includes a built-in PLC function. The panel is protected to IP65 standards and operates within a temperature range of -20 to +70 ºC.

Alarm Management:
The system includes shutdowns for high coolant temperature, low oil pressure, and other critical conditions. Warnings are provided for maintenance requests and sensor failures.

Operating Conditions:
The generator is designed to operate in temperatures ranging from -20 to +70 ºC with a humidity level of 95% without condensation. It conforms to various EN standards for safety and performance.

Additional Information:
Detailed drawings, brochures, and manuals are available on the manufacturer's website. Technical specifications are subject to change without notice.