*mynauticexpo

35 GT/GTC

Product catalog summary

General Specifications
The marine generator model 35 GT/GTC is a three-phase generator with a maximum power output of 28 kW (35 kVA) and a prime power of 25.5 kW. It operates at a frequency of 50 Hz and a voltage of 400/230 V, with an amperage of 50.6 A. The generator is available with or without a canopy, affecting its dimensions and weight. Without a canopy, it measures 1308 mm in length, 630 mm in width, and 732 mm in height, with a dry weight of 494 kg. With a canopy, the dimensions are slightly larger, and the weight increases to 545 kg.

Engine Details
The generator is powered by a Mitsubishi MINI-74 GENSET diesel engine, featuring a 4-stroke, 4-cylinder configuration with a total displacement of 3331 cc. The engine operates at 1500 RPM and has a power output of 30.8 kW. It uses SAE 15W40 oil with a capacity of 10 liters and has a coolant capacity of 13 liters. The engine includes a wet exhaust elbow and a mechanical and indirect injection system.

Fuel System
The generator uses diesel fuel, conforming to ASTM standards. Fuel consumption varies with load, ranging from 2.4 l/h at 25% load to 8.3 l/h at full load. The fuel system includes an in-line injection pump and a mechanical governor.

Electrical System
The electrical system operates at 12 V, with a starter motor rated at 2.2 kW. Optional features include earth isolation, an IP 65 box kit, and current transformers. The alternator is a Sincro SK160WA model with a brushless excitation system and a voltage regulation accuracy of 1%.

Installation Details
The generator requires specific hose diameters for exhaust, sea water, and fuel. It has a maximum fuel lift height of 0.6 m and a maximum raw water lift height of 2.5 m. The installation angle should not exceed 15 degrees in any direction.

Control Panel (SCO 11)
The SCO 11 control panel features a graphic LCD display, multilingual support, and built-in PLC functions. It provides genset measurements, event history logs, and alarm management for various conditions such as high coolant temperature and low oil pressure.

Standards and Compliance
The generator and its components comply with several standards, including EN 60034-1, IEC 60034-1, and ISO 8528-3 for the alternator, and EN 61000-6-2, EN 61000-6-4, and EN 61010-1 for the control panel.

Optional Accessories
Optional accessories include a siphon break kit, engine electrical system at 24 V, service/cruise kits, and various exhaust and water filtration systems.

Catalog excerpts

MARINE GENERATORS General data Maximum power* Prime Power** Total length without canopy Total length with canopy Total width without canopy Total width with canopy Total height without canopy Total height with canopy Dry weight without canopy Dry weight with canopy Base engine manufacturer Compression ratio Injection system Intake system Naturally aspirated Total displacement Coolant capacity Coolant flow rate Salt water flow rate Intake air flow rate Exhaust type V-Belt Protection Rating conditions according to ISO 3046 (100 kPa barometric pressure, 30 % relative humidity abd 25 ºC (77 º F)) * Maximum output power: maximum power supplied by the genset at full load ** Prime Power: rated power according to ISO 3046 and ISO 8528-1. 10 % overload capacity one hour in twelve hours. Fuel system details 1 kW ≈ 1,36 CV 1 kW ≈ 1,36 HP (metric) 1 kW ≈ 1,36 CH 45461 - 6/24

Open the catalog to page 1

Fuel system details Consumption 25% Fuel type Fuel standards Fueloil diesel ASTM Injection pump type Governor type Battery voltage Stop solenoid type Starter motor Earth isolated Current transformers Electrical system Installation details Exhaust hose inner diameter Maximum fuel lift height Sea water hose inner diameter Maximum raw water lift height Fuel feeding hose inner diameter Maximum sea water temperature Fuel return hose inner diameter Maximum installation angle*** Minimum battery capacity Alternator details Brand Regulator type Excitation system Voltage regulation accuracy** Isolation...

Open the catalog to page 2

General Description Power Supply Graphic LCD with light, 128 x 64 pixels display Voltage supply 12/24 DC with fuse protection Genset measures (see Display Information) Configuration protected by user and password Running hour indication Operating Conditions Humidity 95 % without condensation Genset protections (see Alarm Management) Front Panel Protection IP65 Preheating function Standard Conformity CAN bus information with SAE J1939 protocol Maintenance hours control EN 60529 (front panel IP65, back side IP20) Dimensions 195 x 135 x 47 mm Board Cutting 172 x 112 mm Weight 450 g Alarm Management...

Open the catalog to page 3

Authorized dealer Detailed drawings, brochures and manuals are available on the web soleadvance.com. All rights reserved. Technical specifications, data and presentation are subjected to variations, changes and updates without prior notice. Non-contractual information. 45461 - 6/24

Open the catalog to page 4