General Specifications
The marine generator model 29 GS/GSC is a single-phase generator with a maximum power output of 28.4 kW (28.4 kVA) and a prime power of 25.8 kW. It operates at a frequency of 50 Hz and a voltage of 230 V, delivering an amperage of 123.5 A. The generator is designed with one phase.

Dimensions and Weight
Without the canopy, the generator measures 1422 mm in length, 740 mm in width, and 783 mm in height, with a dry weight of 680 Kg. With the canopy, the dimensions are 1600 mm in length, 740 mm in width, and 837 mm in height, with a dry weight of 714 Kg.

Engine Details
The engine is manufactured by Mitsubishi, model MINI-74 GENSET, and is a diesel, 4-stroke engine with 4 cylinders and a total displacement of 3331 cc. It operates at 1500 RPM and has a power output of 30.8 kW (41.89 CV). The engine features a wet exhaust elbow with a diameter of 94 mm and a stroke of 120 mm. The compression ratio is 22:1, and it uses a mechanical and indirect injection system.

Fuel System
The generator uses diesel fuel and adheres to ASTM fuel standards. Fuel consumption varies with load: 2.9 l/h at 25%, 4.3 l/h at 50%, 6.1 l/h at 75%, and 8.2 l/h at 100%. The injection pump is in-line, and the governor type is mechanical.

Electrical System
The electrical system operates at a battery voltage of 12 V, with a starter motor of 2.2 kW. Optional features include earth isolation, an IP 65 box kit, and current transformers.

Installation Details
The exhaust hose has an inner diameter of 75 mm, and the sea water hose has an inner diameter of 32 mm. The maximum fuel lift height is 0.6 m, and the maximum raw water lift height is 2.5 m. The generator can operate at a maximum sea water temperature of 32 ºC and a maximum installation angle of 15 º.

Alternator Details
The alternator is a Meccalte model ECP32 1M 4 C with a DSR regulator type. It has 4 poles, H isolation type, and IP protection 23. The alternator is tropicalized and uses a brushless excitation system.

Standard Equipment and Optional Accessories
Standard equipment includes a 4 m electrical wiring extension, oil extraction pump, rigid bed, silentblocks, and an SCO 11 control panel. Optional accessories include a siphon break kit, engine electrical system at 24 V, and various service/cruise kits.

SCO 11 Panel
The SCO 11 panel features a graphic LCD display, genset measures, configuration protection, running hour indication, and event history log. It includes genset protections, a preheating function, and built-in PLC function. The panel dimensions are 195 x 135 x 47 mm.

Alarm Management
The system includes shutdowns for high coolant temperature, low oil pressure, overspeed, overload, short circuit, over/under voltage, over/under frequency, and emergency stop. Warnings include high coolant temperature, low oil pressure, over/under battery voltage, maintenance request, and sensor failure detection.

Operating Conditions
The operating temperature range is -20 to +70 ºC, with a humidity tolerance of 95% without condensation. The front panel protection is rated at IP65.

Standards and Compliance
The generator complies with standards EN 61000-6-2, EN 61000-6-4, EN 61010-1, EN 60068-2-6, EN 60068-2-30:2005, and EN 60529.