*mynauticexpo

115 GT/GTC

Product catalog summary

General Specifications
The marine generator model 115 GT/GTC is a three-phase generator with a maximum power output of 90 kW (112.4 kVA) and a prime power of 82 kW. It operates at a frequency of 50 Hz and a voltage of 400/230 V, with an amperage of 162.2 A. The generator is available with or without a canopy, affecting its dimensions and weight.

Engine Details
The generator is powered by a Deutz SDZ-165 GENSET diesel engine, featuring a 4-stroke, 4-cylinder configuration with a total displacement of 4764 cc. It operates at 1500 RPM and has a power output of 97 kW. The engine includes a turbocharged intake system with an intercooler and a mechanical direct injection system.

Fuel System
The generator uses diesel fuel, conforming to ASTM standards. Fuel consumption varies with load, ranging from 6.3 l/h at 25% load to 21.5 l/h at full load. The fuel system includes an individual injection pump and a mechanical governor.

Electrical System
The electrical system operates at 24 V, with a starter motor power of 4 kW. Optional features include earth isolation and an IP 65 box kit. The alternator is a Meccalte ECP34 1M 4 C model with a brushless excitation system and a voltage regulation accuracy of 0.01.

Installation and Operating Conditions
The generator can be installed with a maximum fuel lift height of 1.3 m and a maximum raw water lift height of 4 m. It can operate at a maximum sea water temperature of 32 ºC and a maximum installation angle of 10 degrees.

SCO 11 Control Panel
The control panel features a graphic LCD display, multilingual support, and built-in PLC functions. It provides genset measurements, event history logs, and alarm management for various conditions such as high coolant temperature and low oil pressure.

Standards and Compliance
The generator complies with several standards, including EN 61000-6-2, EN 61000-6-4, and EN 61010-1. It is designed to operate in temperatures ranging from -20 to +70 ºC and humidity up to 95% without condensation.

Optional Accessories
Available accessories include a siphon break kit, service/cruise kits, and various exhaust and water filtration systems. Detailed drawings and manuals are available online.

Catalog excerpts

MARINE GENERATORS General data Maximum power* Prime Power** Total length without canopy Total length with canopy Total width without canopy Total width with canopy Total height without canopy Total height with canopy Dry weight without canopy Dry weight with canopy Base engine manufacturer Compression ratio Injection system Intake system Turbocharged with intercooler Total displacement Coolant capacity Coolant flow rate Salt water flow rate Intake air flow rate Exhaust type V-Belt Protection Rating conditions according to ISO 3046 (100 kPa barometric pressure, 30 % relative humidity abd 25 ºC (77 º F)) * Maximum output power: maximum power supplied by the genset at full load ** Prime Power: rated power according to ISO 3046 and ISO 8528-1. 10 % overload capacity one hour in twelve hours. Fuel system details 1 kW ≈ 1,36 CV 1 kW ≈ 1,36 HP (metric) 1 kW ≈ 1,36 CH 45461 - 6/24

Open the catalog to page 1

Fuel system details Consumption 25% Fuel type Fuel standards Fueloil diesel ASTM Injection pump type Governor type Battery voltage Stop solenoid type Starter motor Earth isolated Current transformers Electrical system Installation details Exhaust hose inner diameter Maximum fuel lift height Sea water hose inner diameter Maximum raw water lift height Fuel feeding hose inner diameter Maximum sea water temperature Fuel return hose inner diameter Maximum installation angle*** Minimum battery capacity Alternator details Brand Regulator type Excitation system Voltage regulation accuracy** Isolation...

Open the catalog to page 2

General Description Power Supply Graphic LCD with light, 128 x 64 pixels display Voltage supply 12/24 DC with fuse protection Genset measures (see Display Information) Configuration protected by user and password Running hour indication Operating Conditions Humidity 95 % without condensation Genset protections (see Alarm Management) Front Panel Protection IP65 Preheating function Standard Conformity CAN bus information with SAE J1939 protocol Maintenance hours control EN 60529 (front panel IP65, back side IP20) Dimensions 195 x 135 x 47 mm Board Cutting 172 x 112 mm Weight 450 g Alarm Management...

Open the catalog to page 3

Authorized dealer Detailed drawings, brochures and manuals are available on the web soleadvance.com. All rights reserved. Technical specifications, data and presentation are subjected to variations, changes and updates without prior notice. Non-contractual information. 45461 - 6/24

Open the catalog to page 4