*mynauticexpo

11 GT/GTC

Product catalog summary

Marine Generators Overview
This document provides detailed specifications and operational guidelines for the 11 GT/GTC three-phase marine generators. Key specifications include a maximum power output of 8.4 kW (10.5 kVA) and a prime power of 7.6 kW, operating at a frequency of 50 Hz and voltage of 400/230 V. The generator is designed with three phases and has specific dimensions and weights both with and without a canopy.

Engine Specifications
The engine is manufactured by Mitsubishi, model MINI-33 GENSET, and is a diesel, 4-stroke engine with 3 cylinders and a total displacement of 1318 cc. It operates at 1500 RPM and has a power output of 10.7 kW. The engine features a wet exhaust elbow and a mechanical and indirect injection system.

Fuel System Details
The generator uses diesel fuel and adheres to ASTM fuel standards. Fuel consumption varies with load, ranging from 1.3 l/h at 25% load to 3.1 l/h at full load. The fuel system includes an in-line injection pump and a mechanical governor.

Electrical System
The electrical system operates at 12 V with a starter motor of 1.7 kW. Optional features include earth isolation and an IP 65 box kit. The alternator is a Sincro SK160CA model with a brushless excitation system and voltage regulation accuracy of 1%.

Installation Details
Key installation parameters include exhaust hose diameter, sea water hose diameter, and maximum lift heights for fuel and raw water. The generator can operate at a maximum installation angle of 25 degrees.

Alternator Details
The alternator is synchronous with a BL4 regulator type and has 4 poles. It is tropicalized and conforms to several standards including EN 60034-1 and ISO 8528-3.

Standard Equipment and Optional Accessories
Standard equipment includes a 4 m electrical wiring extension, oil extraction pump, and a control panel. Optional accessories include a siphon break kit, dry and wet exhaust systems, and various service kits.

SCO 5 Panel Features
The SCO 5 control panel features a graphic LCD display, LED indicators, and supports programming via a USB interface. It includes alarm management for various conditions such as high coolant temperature and low oil pressure.

Operating Conditions and Standards
The generator is designed to operate in temperatures ranging from -20 to +70 ºC with a humidity tolerance of 95% without condensation. It conforms to several standards including EN 61000-6-2 and EN 61010-1.

For further details, including detailed drawings and manuals, visit soleadvance.com.

Catalog excerpts

MARINE GENERATORS General data Maximum power* Prime Power** Total length without canopy Total length with canopy Total width without canopy Total width with canopy Total height without canopy Total height with canopy Dry weight without canopy Dry weight with canopy Base engine manufacturer Compression ratio Injection system Intake system Naturally aspirated Total displacement Coolant capacity Coolant flow rate Salt water flow rate Intake air flow rate Exhaust type V-Belt Protection Rating conditions according to ISO 3046 (100 kPa barometric pressure, 30 % relative humidity abd 25 ºC (77 º F)) * Maximum output power: maximum power supplied by the genset at full load ** Prime Power: rated power according to ISO 3046 and ISO 8528-1. 10 % overload capacity one hour in twelve hours. Fuel system details 1 kW ≈ 1,36 CV 1 kW ≈ 1,36 HP (metric) 1 kW ≈ 1,36 CH 45461 - 6/24

Open the catalog to page 1

Fuel system details Consumption 25% Fuel type Fuel standards Fueloil diesel ASTM Injection pump type Governor type Battery voltage Stop solenoid type Starter motor Earth isolated Current transformers Electrical system Installation details Exhaust hose inner diameter Maximum fuel lift height Sea water hose inner diameter Maximum raw water lift height Fuel feeding hose inner diameter Maximum sea water temperature Fuel return hose inner diameter Maximum installation angle*** Minimum battery capacity Alternator details Brand Regulator type Excitation system Voltage regulation accuracy** Isolation...

Open the catalog to page 2

General Description Power Supply Graphic LCD with light Display, 128 x 64 pixels Voltage supply 12/24 DC with fuse protection Marine genset measures (see display information) Marine genset protections (see alarm management) Operating Conditions Running hour indicator Humidity 95 % without condensation Programming from the same panel Front Panel Protection IP65 Universal Interface Standard Conformity Preheating function CAN bus output with SAEJ1939 protocol EN 60529 (front panel IP65, back side IP20) Alarm Management Display Information Measurement L1-L3 Voltage (V), Frequency (Hz), Oil Pressure...

Open the catalog to page 3

Authorized dealer Detailed drawings, brochures and manuals are available on the web soleadvance.com. All rights reserved. Technical specifications, data and presentation are subjected to variations, changes and updates without prior notice. Non-contractual information. 45461 - 6/24

Open the catalog to page 4