General Specifications
The marine generator model 100 GTA/GTAC is a three-phase generator with a maximum power output of 77.8 kW (97.3 kVA) and a prime power of 70.8 kW. It operates at a frequency of 60 Hz and a voltage of 480/277 V, with an amperage of 117 A.

Dimensions and Weight
Without the canopy, the generator measures 1760 mm in length, 865 mm in width, and 968 mm in height, with a dry weight of 988 Kg. With the canopy, the dimensions are 2007 mm in length, 865 mm in width, and 1048 mm in height, with a dry weight of 1100 Kg.

Engine Details
The engine is manufactured by Deutz, model SDZ-109 GENSET, and is a diesel, 4-stroke engine with 4 cylinders and a total displacement of 4764 cc. It has a power output of 85 kW (115.6 CV) and operates at 1800 RPM. The engine features a turbocharged intake system and a mechanical and direct injection system.

Fuel System
The generator uses diesel fuel, with consumption rates of 5.8 l/h at 25% load, 11.2 l/h at 50% load, 16.1 l/h at 75% load, and 20.9 l/h at 100% load. The fuel system includes an individual injection pump and a mechanical governor.

Electrical System
The electrical system operates at a battery voltage of 24 V, with a starter motor of 4 kW and an alternator of 35 A. Optional features include earth isolation, an IP 65 box kit, and current transformers.

Installation Details
The generator requires a minimum battery capacity of 24 V 90 Ah and has a maximum fuel lift height of 1.3 m. The maximum raw water lift height is 4 m, and the maximum sea water temperature is 32 ºC.

Alternator Details
The alternator is a Meccalte model ECP34 1S 4 C, with a DSR regulator type and 4 poles. It features a brushless excitation system and complies with standards EN60034-1 and IEC 60034-1.

Standard Equipment and Optional Accessories
Standard equipment includes a 4 m electrical wiring extension, oil extraction pump, rigid bed, silentblocks, and an SCO 11 control panel. Optional accessories include a siphon break kit, service/cruise kits, and various exhaust and water systems.

SCO 11 Panel
The SCO 11 panel features a graphic LCD display, genset measures, configuration protection, and alarm management. It supports multiple languages and includes a built-in PLC function.

Alarm Management
The system includes shutdowns for high coolant temperature, low oil pressure, overspeed, overload, short circuit, over/under voltage, over/under frequency, and emergency stop. Warnings include high coolant temperature, low oil pressure, and maintenance requests.

Operating Conditions
The generator operates within a temperature range of -20 to +70 ºC and a humidity level of 95% without condensation. The front panel has an IP65 protection rating.

Display Information
The display provides measurements for voltage, frequency, oil pressure, coolant temperature, battery voltage, RPM, active power, apparent power, current, and power factor.

For further details, technical specifications, and updates, visit soleadvance.com.