Super Rugged Series. The monocrystalline high efficiency SR cells are sandwiched by two patented metallic grids. The grid on the front is carefully tailored to optimize the current harvesting, while the one behind the cell offers strong mechanical support. The grids essentially form a double shield that acts as a conducting reinforcement to the solar cell. Extreme crack and bend tolerance are built in, providing a guarantee of high efficiency and unmatched durability. Features ✓ High tolerance to cracks and bending thanks to the double shield protecting the cell ✓ Flexible and lightweight (2.2 kg/m2) ✓ Completely waterproof and resistant to salt water ✓ Thin (less than 2 mm) ✓ 5 year warranty against manufacturing defects ✓ Positive power tolerance (0%, +5%) ✓ Integrated bypass diodes to minimise output losses associated with partial shading ✓ Available with different front sheets, many fixing and electrical wiring options ✓ White, black or transparent back sheet ✓ Adaptable to any battery: from 5 to 48 volt, lead-acid or lithium ✓ Designed and ma

At the core of Merlin Solar’s patented technology is an innovative pair of metal grids that serve as intra-cell and inter-cell interconnects. The same copper and solder as any other bus bar cell are used, but 20 redundant lines and 180+ interconnects, not only enable to extract more power but also dramatically improve the reliability, performance and ruggedness of the solar panels. Merlin SolarTM cell 10 The metallic grid on the front of the cell is specifically designed to maximize the current harvesting. Morepowerandhighreliability. On the rear of the cell a second grid provides extreme resistance...