SOLARA M-Series

Product catalog summary

Overview: The document provides technical specifications and features of the SOLARA M-Series solar panels, highlighting their design, performance, and material quality.

Key Features:

Extremely flat, walkable, and semi-flexible design.
Stability and maximum heat dissipation due to an innovative aluminum-sandwich support plate.
Additional solar cells for efficient charging and maximum daily yield.
Materials withstand extreme heat, high humidity, sea, and saltwater.
Teflon-type protective film on both sides for durability.
Flat, glued, and screwed cable outlet with strain relief.
Cell protector with external protection diodes included.
Cable lead-through prepared in the carrier plate.
Manufactured exclusively in Germany.

Cell Technology: Poly (multi) crystalline cells with ETFE front and back side foil, welded at the edge.

Performance Specifications:

Types: S50P36, S110P42, S170P43, S220P43, S320P41.
Daily output in summer in Germany ranges from 50 Wh/d to 320 Wh/d.
Rated output (Pmpp) ranges from 12 Wp to 80 Wp.
Short-circuit current (Isc) ranges from 0.65 A to 3.84 A.
Open-circuit voltage (Uoc) ranges from 22.72 V to 27.13 V.
Voltage (Umpp) ranges from 19.15 V to 22.88 V.
Current (Impp) ranges from 0.61 A to 3.62 A.
Number of cells ranges from 36 to 43.

Technical Data:

Reverse current IR loadability: 12 A.
Measuring accuracy Pmpp at STC: ± 5%.
Operating temperature range: -40°C to +85°C.

Thermal Properties:

Temperature coefficients: TK Pmpp -0.45 %/K, TK Uoc -0.36 %/K, TK Isc 0.03 %/K.
Nominal Operating Cell Temperature (NOCT): 46 ± 2°C.

Dimensions and Weight:

Dimensions (L x W x H) range from 431 x 243 x 4 mm to 798 x 695 x 4 mm.
Weight ranges from 0.9 kg to 3.7 kg.
Cell dimensions vary from 52 x 35 mm to 104 x 104 mm.

Quality Assurance: 5 years product guarantee, made in Germany.

Catalog excerpts

Extremely flat, fully accessible and semiflexible. SOLARA M-Series EXTREMELY FLAT, WALKABLE AND SEMI-FLEXIBLE ≥ Stability and maximum heat dissipation due to innovative aluminium-sandwich support plate ≥ Additional solar cells for efficient charging ≥ Maximum daily yield due to additional single cells ≥ All materials withstand extreme heat, high humidity, sea and salt water ≥ Teflon-type extremely resistant protective film on front and back ≥ Flat, glued and screwed cable outlet with strain relief ≥ Cell protector with external protection diodes included ≥ Cable lead-through already prepared in the carrier plate ≥ Manufactured exclusi

Open the catalog to page 1

SOLARA M-Series PERFORMANCE Type Daily output in summer in Germany (Ø) Wh/d Rated output * (Pmpp) Wp Short-circuit current (Isc) A Open-circuit voltage (Uoc) V Voltage(Umpp) V Current (Impp) A No. of cells * Performance at STC, Standard Testing Conditions: 1000 W/m2, AM 1,5, cell temperature 25° C Dimensions and weight Dimensions (L x W x H) mm Weight kg Cell dimensions mm Thermal properties Used materials Cell technology Front/back Cable outlet Hotspot protector (external) Poly (multi) crystalline cells ETFE front and back side foil, welded at the edge Solid, small, flat, seawater-tight, glued...

Open the catalog to page 2

SOLARA M-Series

SOLARA M-Series

Catalog excerpts

All SOLARA catalogs and brochures