Exhibit with us
*mynauticexpo  
English
  1. Catalogs
  2. SMD
  3. DECK EQUIPMENT SALES BROCHURE
video corpo

DECK EQUIPMENT SALES BROCHURE

DECK EQUIPMENT SALES BROCHURE
1 / 40 PagesView full catalog

DECK EQUIPMENT SALES BROCHURE

Product catalog summary
Launch Solutions for ROVs
SMD provides comprehensive launch and recovery systems (LARS) for ROVs, designed for durability and certified by Lloyds or DNV. These systems can handle up to 12Te back tensions and include features such as umbilical wind-on, mechanical termination, and optional deck lighting and cameras.
General Features:
  • Standard SWL LARS options: 6Te, 8Te, 12Te, and 15Te
  • Lightweight designs for sea state 6
  • Custom designs available
A-Frame Features:
  • Safe self-erecting designs with anti-crush mechanisms
  • Integrated docking head and pivoting sheave wheel
Umbilical Winch Features:
  • Dual control for remote or local operation
  • Fail-safe brake and quick coupling hydraulic connections
Launch Solutions for Trenching ROVs
SMD offers turnkey launch systems for subsea trenching vehicles, certified by Lloyds or DNV, with integrated A-Frame, winch, and HPU controls, suitable for sea state 6.
Features:
  • Custom designs available
  • Cursor system docking head with integrated lift winches
  • Slack compensation and constant tension system
Launch Solutions for Ploughs
SMD provides turnkey launch systems for subsea ploughs, minimizing deck space and certified by Lloyds or DNV. These systems handle high tension wind of umbilicals and tow wires.
A-Frame Features:
  • Standard 30Te and 50Te systems
  • Wide angle for handling and towing ploughs
Umbilical Winch Features:
  • Constant tension system
  • Axial fleeing system with load cell for monitoring
A-Frames / Gantry Datasheets
6Te SWL Narrow Angle A-Frame: Suitable for ROV LARS deployment, certified by DNV & Lloyds, for sea state 6.
8Te SWL Narrow Angle A-Frame: Suitable for ROV LARS deployment, certified by DNV & Lloyds, for sea state 6.
12Te SWL Narrow Angle Extending A-Frame: Suitable for ROV LARS deployment, certified by DNV & Lloyds, for sea state 6.
12Te SWL Gantry: Suitable for ROV LARS deployment, certified by Lloyds, for sea state 6.
Overview: The document details specifications and operational guidelines for A-Frame and Umbilical Winch systems used in ROV LARS deployments, including load capacities, operational environments, and control systems.
12Te Wide Angle A-Frame: Designed for ROV LARS deployment with a SWL of 12Te, certified by Lloyds, operating in sea states up to 5.
18Te-25Te Wide Angle A-Frames: Support SWLs between 18Te and 25Te, designed for sea states up to 6.
25Te Cursor Launch A-Frame: Designed for narrow angle deployment with a cursor docking head, supporting an SWL of 25Te, for sea states up to 6.
40Te Cursor Launch A-Frame: With an SWL of 40Te, suitable for sea states up to 6.
30Te and 50Te Wide Angle A-Frames: Used for plough LARS deployment, with SWLs of 30Te and 50Te.
Umbilical Winches: Various models with SWLs ranging from 4Te to 12Te, designed for safe area or Zone II environments.
Key Features and Controls: Systems include hydraulic power units, emergency stop functions, and proportional control for precise operation.
Overview: Specifications and features of umbilical winches, tow winches, HPUs, and cable lay equipment for offshore and subsea operations.
Umbilical Winches: Models with specific line pull capacities, operating temperatures, and hydraulic specifications, designed for shallow and deep-water operations.
Tow Winches: Designed for integration with subsea plough packages, offering line pull capacities of 35Te or 50Te.
Hydraulic Power Units (HPUs): Available in 110kW, 150kW, and 250kW models, suitable for safe area or Zone II environments.
Cable Lay Equipment: Includes Linear Cable Engines (LCEs) and Cable Drum Engines (CDEs), with integrated control systems.
Control Systems: Feature ergonomic operator consoles, video monitor arrays, and options for cable parameter monitoring and alarms.
Key Specifications: Detailed dimensions, hydraulic supply requirements, and control features for each piece of equipment.
LCE Features and Specifications: Include low mass/inertia guides, wheel arm geometry, and modular design.
Cable Drum Engines (CDE): Knife-free self-fleeting drum design for automatic cable travel.
Draw-Off / Hold-Back Cable Engine (DOHB): AC servo motor-driven system for anti-slip performance.
Cable Transporter: Available in 1 and 2-wheel pair hydraulic drive options.
Contact Information: Provides contact details for SMD's worldwide sales offices.
See more

Catalog excerpts

DECK EQUIPMENT SALES BROCHURE-1

DECK EQUIPMENT SALES BROCHURE

 Open the catalog to page 1
DECK EQUIPMENT SALES BROCHURE-4

LAUNCH SOLUTIONS FOR ROV'S SMD bring years of knowledge and experience to the design and manufacture of launch and recovery systems (LARS) to offer a complete range of solutions for operators, system integrators and Original Equipment Manufacturers (OEMs) of ROV systems. Standard SMD LARS systems are manufactured to interface seamlessly with SMD Work Class ROV systems but can be easily interfaced to other equipment suppliers ROV and TMS systems. All SMD turnkey ROV LARS systems are designed for long service life and are available with Lloyds Design or DNV Approval as standard and can be load...

 Open the catalog to page 4
DECK EQUIPMENT SALES BROCHURE-5

LAUNCH SOLUTIONS FOR TRENCHING ROV's SMD bring years of knowledge and experience to the design and manufacture of Launch and Recovery Systems (LARS) to offer a range of complete turnkey launch systems specifically designed for handling subsea trenching vehicles. Standard LARS are manufactured to interface with SMD's range of trenching vehicles to minimise deck space to form a complete vehicle handling system but can be easily interfaced to other trenching vehicles manufactured by other equipment suppliers. All SMD LARS are designed for long service life and are available with Lloyds Design or...

 Open the catalog to page 5
DECK EQUIPMENT SALES BROCHURE-6

LAUNCH SOLUTIONS FOR PLOUGHS SMD bring years of knowledge and experience to the design and manufacture of Launch and Recovery Systems (LARS) to offer a range of complete turnkey launch systems specifically designed for handling subsea ploughs. Standard LARS are manufactured to interface with SMD's range of ploughs to minimise deck space to form a plough handling system but can be easily interfaced with ploughs manufactured by other equipment suppliers. All SMD LARS are designed for long service life and are available with Lloyds Design or DNV Approval. SMD's turnkey systems can include umbilical...

 Open the catalog to page 6
DECK EQUIPMENT SALES BROCHURE-7

A-FRAMES / GANTRY DATASHEETS

 Open the catalog to page 7
DECK EQUIPMENT SALES BROCHURE-8

6Te SWL NARROW ANGLE A-FRAME GENERALI Transport (Road Transportable) Equipment Handling INSTRUMENTS / CONTROLI Distance between legs 2028mm Height under docking head 5479mm

 Open the catalog to page 8
DECK EQUIPMENT SALES BROCHURE-9

8Te SWL NARROW ANGLE A-FRAME GENERALI Transport (Road Transportable) Equipment Handling INSTRUMENTS / CONTROLI Distance between legs 2864mm Height under docking head 5598mm

 Open the catalog to page 9
DECK EQUIPMENT SALES BROCHURE-10

12Te SWL NARROW ANGLE EXTENDING A-FRAME GENERALI

 Open the catalog to page 10
DECK EQUIPMENT SALES BROCHURE-11

Latch - Flag & LED Damping On / Off Emergency Stop activated Gantry stowed position Docking head position HPU Run HPU Fault Gantry Inboard / Outboard Docking head Up / Down Docking Head Latch / De-Latch Docking Head Rotate Docking Head Recovery / Launch / Damping

 Open the catalog to page 11
DECK EQUIPMENT SALES BROCHURE-12

12Te WIDE ANGLE A-FRAMEGENERAL Typical Application INDICATORS Docking Head swing Float/Fixed Lower frame Float/Fixed Lower frame retracted limit A-Frame inboard stop Latch Engaged HPU Fault HPU Run Docking Frame Inboard/outboard Latch Open / Close Latch Float/Fixed A-Frame Luff, Joystick Proportional Control Docking head rotate Docking head swing fixed/float Lower Frame Up/Down Lower Frame Fixed/Float Emergency Stop Linksyn™ is a Trade Mark of Trelleborg Offshore

 Open the catalog to page 12
DECK EQUIPMENT SALES BROCHURE-13

18Te-25Te SWL WIDE ANGLE A-FRAMESGENERAL Typical Application INDICATORS Latch - Flag & LED Damping On / Off Inboard stop LED Emergency Stop activated Gantry In/Out Telescope Up / Down / Float Inboard over ride Latch Engage / Release / Float Rotate Left / Right Damping On / Off

 Open the catalog to page 13
DECK EQUIPMENT SALES BROCHURE-14

25Te SWL CURSOR LAUNCH A-FRAME GENERALI INDICATORS Gantry In/Out Telescope Up / Down / Float Cursor Winch Raise / Lower Latch Engage / Release / Float Rotate Left / Right Damping On / Off Cursor winch constant tension Latch - Flag & LED Damping On / Off Cursor Winch Fixed / Float Emergency Stop activated

 Open the catalog to page 14
DECK EQUIPMENT SALES BROCHURE-15

40Te SWL CURSOR LAUNCH A-FRAME GENERALI INDICATORS Gantry In/Out Telescope Up / Down / Float Cursor winch raise / lower Cursor winch constant tension Latch Engage / Release / Float Rotate Left / Right Damping On / Off Cursor locked / free Latch - Flag & LED Damping On / Off Cursor Winch Fixed / Float Emergency Stop activated

 Open the catalog to page 15
DECK EQUIPMENT SALES BROCHURE-16

30Te SWL WIDE ANGLE A-FRAME GENERAL Docking Frame Port / Starboard travel Latch Open / Close Auxiliary Winch In / Out A-Frame luff Joystick Proportional Control A-Frame 45o inboard override Emergency Stop A-Frame 45o inboard A-Frame outboard over-travel Docking Frame Port / Starboard Travel Limit Latch Engaged HPU Fault HPU Run

 Open the catalog to page 16
DECK EQUIPMENT SALES BROCHURE-17

50Te SWL WIDE ANGLE A-FRAME GENERALI INDICATORS Docking Frame Port / Starboard travel Latch Open / Close Auxiliary Winch In / Out A-Frame luff, Joystick Proportional Control A-Frame 45o inboard override Upper Frame Up/Down Lower Frame Up/Down Scissor frame fixed /float Emergency Stop A-Frame 45o inboard A-Frame outboard over-travel Docking Frame Port / Starboard Travel Limit Latch Engaged Scissor frame fixed /float Lower Frame Up/Down HPU Fault HPU Run

 Open the catalog to page 17
DECK EQUIPMENT SALES BROCHURE-18

UMBILICAL WINCH DATASHEETS

 Open the catalog to page 18
DECK EQUIPMENT SALES BROCHURE-19

4Te SWL UMBILICAL WINCH general!

 Open the catalog to page 19
DECK EQUIPMENT SALES BROCHURE-20

6Te SWL UMBILICAL WINCH Deck Mounting Standalone Control Console Remote operation possible

 Open the catalog to page 20
DECK EQUIPMENT SALES BROCHURE-21

8Te SWL UMBILICAL WINCHGENERAL Typical Application Standalone Control Console Remote operation possible

 Open the catalog to page 21
DECK EQUIPMENT SALES BROCHURE-22

12Te SWL UMBILICAL WINCHGENERAL Typical Application Standalone Control Console Remote operation possible

 Open the catalog to page 22
DECK EQUIPMENT SALES BROCHURE-23

12Te SWL AXIAL UMBILICAL WINCH GENERALI Deck Mounting NOTES! • Axial fleeting system • Optional spray bar and canopy • Optional deck observation camera Linksyn™ is a Trade Mark of Trelleborg Offshore

 Open the catalog to page 23
DECK EQUIPMENT SALES BROCHURE-24

15Te SWL AXIAL UMBILICAL WINCH GENERALI • Axial fleeting featuring diverter sheave for inline umbilical exit • Suitable for both shallow and deep water operations • 20ft ISO container footprint featuring twist lock corners for ease of road transport

 Open the catalog to page 24
DECK EQUIPMENT SALES BROCHURE-25

18Te SWL CONSTANT EXIT HIGH POWER UMBILICAL WINCH GENERALI

 Open the catalog to page 25
DECK EQUIPMENT SALES BROCHURE-26

25Te SWL CONSTANT EXIT HIGH POWER UMBILICAL WINCH WITH SLACK ARM GENERAL! • Spray nozzle umbilical cooling (200LPM @2-3bar (10bar max) • Optional deck camera and pan and tilt assembly suitable for deck installation • Brakes released flashing beacon • Fleeting error audible alarm

 Open the catalog to page 26
DECK EQUIPMENT SALES BROCHURE-27

26Te SWL CONSTANT EXIT HIGH POWER UMBILICAL WINCH WITH SLACK ARM / SNATCH LIMITER GENERALI Linksyn™ is a Trade Mark of Trelleborg Offshore

 Open the catalog to page 27

All SMD catalogs and brochures

  1. WORK CLASS ROVS
    WORK CLASS ROVS

    16  Pages

  2. 15Te SWL AXIAL UMBILICAL WINCH
    15Te SWL AXIAL UMBILICAL WINCH

    1  Page

  3. 12Te SWL AXIAL UMBILICAL WINCH
    12Te SWL AXIAL UMBILICAL WINCH

    1  Page

  4. 8Te SWL UMBILICAL WINCH
    8Te SWL UMBILICAL WINCH

    1  Page

  5. 6Te SWL UMBILICAL WINCH
    6Te SWL UMBILICAL WINCH

    1  Page

  6. 4Te SWL UMBILICAL WINCH
    4Te SWL UMBILICAL WINCH

    1  Page

  7. QTRENCHER 1000
    QTRENCHER 1000

    2  Pages

  8. QTRENCHER 1400
    QTRENCHER 1400

    2  Pages

  9. QTRENCHER 2800
    QTRENCHER 2800

    2  Pages

  10. CBT800
    CBT800

    2  Pages

  11. CBT2100
    CBT2100

    2  Pages

  12. LBT1
    LBT1

    2  Pages

  13. CBT1100
    CBT1100

    2  Pages

  14. LBT1100
    LBT1100

    2  Pages

  15. MD3 160
    MD3 160

    2  Pages

  16. HD 200
    HD 200

    2  Pages

  17. HD 300
    HD 300

    2  Pages

  18. UD4 400
    UD4 400

    2  Pages

  19. MP
    MP

    2  Pages

  20. BP
    BP

    2  Pages

  21. Hydraulic Power Units
    Hydraulic Power Units

    1  Page

  22. Hydraulic Valve Pack
    Hydraulic Valve Pack

    1  Page

  23. Compensators
    Compensators

    1  Page

  24. DVECS-S
    DVECS-S

    1  Page

  25. Hydraulic Thruster
    Hydraulic Thruster

    1  Page

  26. ICMU
    ICMU

    1  Page

  27. Q trencher
    Q trencher

    2  Pages

  28. Q trencher 1400/2800
    Q trencher 1400/2800

    4  Pages

  29. CBT
    CBT

    2  Pages

  30. Atom
    Atom

    3  Pages

  31. SMD General Brochure
    SMD General Brochure

    4  Pages

  32. Trenching & Bespoke Projects
    Trenching & Bespoke Projects

    20  Pages

  33. Hydraulic Power Pack
    Hydraulic Power Pack

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.