1. Catalogs
  2. Smart Switch Technologies
  3. Smartswitch Information and Control

Smartswitch Information and Control

Smartswitch Information and Control
1 / 13 PagesView full catalog

Smartswitch Information and Control

Product catalog summary
Overview: The document outlines the technical specifications and functionalities of various marine control systems, including tank controllers, bilge controllers, alarm monitors, and navigation light monitors. These systems provide centralized control and monitoring for different vessel operations.
1. TC-8000 Tank Controller:
  • Monitors and controls up to eight tanks with a networked system.
  • Features visual indicators for tank levels, seacock positions, and pump statuses.
  • Offers manual and automatic control modes for pumps and water makers.
  • Supports up to eight HT-100 or HT-100/P tank controllers and optional RD-800 repeater displays.
  • Operates on a 2-wire network cable with a maximum length of 1000 meters.
2. TM-4000 Tank Monitor:
  • Designed for monitoring and controlling up to four tanks.
  • Provides similar functionalities as the TC-8000 but for fewer tanks.
  • Includes optional RM-400 repeater displays for extended monitoring capabilities.
3. BC-8000 Bilge Controller:
  • Controls up to eight bilge areas with centralized monitoring.
  • Features programmable pump delay times and alarm settings.
  • Includes BC-100 or BC-100/P controllers for managing pumps and sensors.
  • Optional RB-800 repeater displays for remote monitoring.
4. AL-8000 Alarm Monitor:
  • Monitors up to 32 different alarms across a vessel.
  • Includes programmable alarm tones and names for easy identification.
  • Supports up to four AL-100 input units and optional RA-800 remote displays.
5. NV-8000 NAV Light Monitor:
  • Monitors and controls up to 16 navigation lights.
  • Features fault detection for bulb, power, and wire failures.
  • Supports programmable light groups and twilight sensor inputs.
  • Optional NR-800 repeater displays for extended monitoring.
Technical Specifications:
  • All systems operate on a supply voltage of 12 ~ 32 Volts DC with auto-sensing capabilities.
  • Network cable length for all systems is capped at 1000 meters.
  • Data retention is ensured for up to 50 years without power.
Conclusion: These systems provide comprehensive solutions for marine vessel monitoring and control, offering flexibility, ease of installation, and enhanced operational visibility.
System Overview: The document provides detailed information on marine control systems for monitoring and controlling navigational lights, marine toilets, holding tanks, and other applications. These systems are designed for flexibility, reliability, and ease of installation while minimizing wiring costs.
Navigational Light Monitoring System: The NV-2000 system monitors up to 32 navigational lights from a single location, featuring visual and audible alarms for faulty lights, twilight monitoring, and programmable alarms.
Smart Switch Programmable Toilet Controller: Designed for electric marine toilets, offering full and half flush cycles, automatic voltage sensing, and protection against various electrical issues.
Holding Tank Controller: The ST-660 model controls holding tank macerator pumps with automatic and manual operation modes, visual indicators, and programmable discharge cycle times.
Programmable Controllers: The SPT 001 and SDP 003 models offer programmable time options and are designed for marine use, encapsulated in silicon for reliability.
Interface Modules: Includes NMEA-0183 interface for connecting Smart Switch products to systems, and IF-100 Spy Interface for monitoring network activity.
Water and Pressure Sensors: The FS-2A water sensor and SEN-100 pressure sensor provide reliable monitoring in harsh marine environments.
Ordering Information: Part numbers and descriptions for ordering components and systems, highlighting adaptability and integration capabilities.
See more

Catalog excerpts

Smartswitch Information and Control-1

Dear Fellow Manner, If you treasure the life and adventure of boating as I do; and value the importance of the safety and reliability that quality products can bring to our sport; you will appreciate this line of products from Smart Switch Our design effort has been focused on providing clear visibility into a variety of vessel operations while providing the captain straight-forward and logical control options. With these objectives in mind, Smart Switch Technologies has produced a family of products that enable monitoring and control of on-board operations, crucial to the safe, efficient, and trouble- free operation of ocean-going vessels. Vessel operations encompassed by our product family • Tank Monitoring and Control • Bilge Monitoring and Pump/Fan Control • Navigation Light Monitoring and Control • Marine Toilet Control • General Alarm Monitoring Designed and built in New Zealand under strict ISO 9000 quality standards, these state-of-the-art systems have been supplied to the marine industry since 2002. Today they are proving themselves on hundreds of vessels in and around Australia, New Zealand, and the South Pacific. Our Research and Development Team has spent considerable time and effort in developing, designing and producing these systems specifically for the marine environment using proven techniques and materials which will ensure a long life at sea. The technology we have employed has been used successfully for more than twenty years in the most demanding factory- floor environments around the world. Generally referred to as "distributed intelligence" or "network-based systems", this technology, when properly enhanced for the demands of the marine environment, provides a robust platform for vessel operations. The beauty of these products lies not only in the sophistication of their operation - you will appreciate the many features which demonstrate a practical understanding of vessel operations - but also their ease of installation and superior reliability - an unbeatable combination. For new vessels and those undergoing retrofit, the value of network systems is obvious. A simple 2-wire network cable (as used for telephone installations) can be laid throughout the vessel and be up to 1000 meters in length. 100% solid state, silicon sealed Input/Output Units, used for monitoring and control, are mounted near the actual devices (tanks, bilges, etc), and tied to the network cable. LCD Display Units, used for status display, alarms, and control can be located anywhere on board and connected to the network cable. This combination of "plug-and-play" components provides a dedicated system, easily installed and easily understood by both installers and owners. Review the details of these systems as presented in this catalogue. I think you will agree that they represent a true breakthrough in marine control systems and confirm our objective to provide Systems Designed Good sailing, Neil Gilmore, Chief of Design, Smart Switch. Tank Monitoring: Bilge Control: Rlarm Monitoring: Toilet Control: Holding Tank Controller: ST-660 As Smart Switch products are under constant development all specifications are subject to chage without notice. Please contact uour distributor if uou have any queries.

 Open the catalog to page 1
Smartswitch Information and Control-2

Monitor and Control up to 8 tanks from one location. The TC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight tanks. The diagram (right) shows a typical system layout. The system consists of the TC-8000 display controller (as seen above) up to eight HT-100 or HT-100/P tank controllers and any number of optional RD-800 repeater displays communicating via a 2-wire network cable with a maximum cable length of 1000 meters. TC- 8000 DISPLAY CONTROLLER: Is a powerful tank monitor and control system. • Full control from one central location on your...

 Open the catalog to page 2
Smartswitch Information and Control-3

4 Tank Controller TM 4000 Actual Size = 120 x 80 x 19mm 4 Channel Tank Monitor TM 4000 FOUR CHANNEL HOLDING TANK MONITOR SYSTEM LAYOUT FOR MODEL TM-4000 Any device can sit anywhere on this two core Bus cable. Any combination of HT-100/P and or HT-100 (up to eight) can be connected plus, any number of repeater displays (model RM-400). NOTE: The HT-100/P has the pump and valve option while the HT-100 does not. Monitor and Control up to 4 tanks from one location. TM-4000 DISPLAY CONTROLLER: Is a powerful tank monitor system. • Full control from one central location on your boat. • Visual indication...

 Open the catalog to page 3
Smartswitch Information and Control-4

Monitor/Control up to 8 bilges from one location, The BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. The diagram (right) shows a typical system layout. The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters. BC- 8000 DISPLAY CONTROLLER: Is a powerful bilge control system. • Full control from one central location on your boat....

 Open the catalog to page 4
Smartswitch Information and Control-5

Alarm Monitor Al 8000 Actual Size = 126 x 116 x 21mm Alarm Monitor Al 8000 SYSTEM OVERVIEW The AL-8000 Alarm Monitor has been developed to allow monitoring of up to 32 different inputs. It is a network system consisting of the AL-8000 Master Display Unit and up to four AL-100 Input Units located anywhere on the vessel. Monitor up to 32 alarms from one location. The AL-8000 alarm monitor provides an intelligent networked solution for the monitoring up to 32 different alarms.The diagram (right) shows a typical system layout. The system consists of the AL-8000 display controller (as seen above),...

 Open the catalog to page 5
Smartswitch Information and Control-6

NfìV Light Monitor Monitor/Control up to 16 NAV lights from one location The NV-8000 nav light monitor provides an intelligent networked solution for monitoring & controlling up to 16 different NAV lights. The diagram (right) shows a typical system layout. The system consists of the NV-8000 display controller (as seen above) and up to 2 NV-100 units and one optional NR-800 repeater display which communicate via a 2-wire network cable with a maximum cable length of 1000 meters. NV- 8000 DISPLAY CONTROLLER: Master display unit. • Visual & audible alarm for any faulty light. • Every circuit monitored...

 Open the catalog to page 6

All Smart Switch Technologies catalogs and brochures

  1. SEN-S/S100

    1  Page

  2. NV-8000

    1  Page

  3. SMF-001

    1  Page

  4. BC-8000

    1  Page

  5. FR-4000

    1  Page

  6. FR-8000

    1  Page

  7. TD-4000

    1  Page

  8. TC-8000

    1  Page

  9. TM-4000

    1  Page

  10. FR-1600

    1  Page

  11. FS-2A

    1  Page

  12. FC -006

    1  Page

  13. SMS-2

    1  Page

  14. SMS8

    1  Page

  15. PR-100

    1  Page

  16. SM-420

    1  Page

  17. SM-180

    1  Page

  18. FC - 8000

    1  Page

  19. AM 100

    1  Page

  20. NAV-8

    1  Page

  21. FS 2A

    1  Page

  22. SEN 100

    1  Page

  23. IF 100

    1  Page

  24. NMEA 0183

    1  Page

  25. ST 660

    1  Page

  26. NV 2000

    1  Page

  27. NV 8000

    1  Page

  28. FR 8000

    2  Pages

  29. TM 4000

    1  Page

Archived catalogs

  1. BSW 1000

    1  Page

  2. TD 4000

    1  Page

  3. AL 8000

    1  Page

  4. TC 8000

    1  Page

  5. BC 8000

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.