Dear Fellow Mariner, If you treasure the life and adventure of boating as I do; and value the importance of the safety and reliability that quality products can bring to our sport; you will appreciate this line of products from Smart Switch Our design effort has been focused on providing clear visibility into a variety of vessel operations while providing the captain straight-forward and logical control options. With these objectives in mind, Smart Switch Technologies has produced a family of products that enable monitoring and control of on-board operations, crucial to the safe, efficient, and trouble- free operation of ocean-going vessels. Vessel operations encompassed by our product family • Tank Monitoring and Control • Bilge Monitoring and Pump/Fan Control • Navigation Light Monitoring and Control • Marine Toilet Control • General Alarm Monitoring Designed and built in New Zealand under strict ISO 9000 quality standards, these state-of-the-art systems have been supplied to the marine industry since 2002. Today they are proving themselves on hundreds of vessels in and around Australia, New Zealand, and the South Pacific. Our Research and Development Team has spent considerable time and effort in developing, designing and producing these systems specifically for the marine environment using proven techniques and materials which will ensure a long life at sea. The technology we have employed has been used successfully for more than twenty years in the most demanding factory- floor environments around the world. Generally referred to as "distributed intelligence" or "network-based systems", this technology, when properly enhanced for the demands of the marine environment, provides a robust platform for vessel operations. The beauty of these products lies not only in the sophistication of their operation - you will appreciate the many features which demonstrate a practical understanding of vessel operations - but also their ease of installation and superior reliability - an unbeatable combination. For new vessels and those undergoing retrofit, the value of network systems is obvious. A simple 2-wire network cable (as used for telephone installations) can be laid throughout the vessel and be up to 1000 meters in length. 100% solid state, silicon sealed Input/Output Units, used for monitoring and control, are mounted near the actual devices (tanks, bilges, etc), and tied to the network cable. LCD Display Units, used for status display, alarms, and control can be located anywhere on board and connected to the network cable. This combination of "plug-and-play" components provides a dedicated system, easily installed and easily understood by both installers and owners. Review the details of these systems as presented in this catalogue. I think you will agree that they represent a true breakthrough in marine control systems and confirm our objective to provide Systems Designed Good sailing, Neil Gilmore, Chief of Design, Smart Switch.

Tank AAonitoring: Bilge Control: Alarm AAonitoring: Toilet Control: Holding Tank Controller: ST TD 4000 - 4 Channel Tank & Battery Monitor BSLU 1 000 - SmortBilge Float Switch Si Controller FR 8000 - Fire Alarm System fls Smart Switch products are under constant development all specifications are subject to chage without notice. Please contact uour distributor If uou have any queries.

Monitor and Control up to 8 tanks from one location. The TC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight tanks. The diagram (right) shows a typical system layout. The system consists of the TC-8000 display controller (as seen above) up to eight HT-100 or HT-100/P tank controllers and any number of optional RD-800 repeater displays communicating via a 2-wire network cable with a maximum cable length of 1000 meters. TC- 8000 DISPLAY CONTROLLER: Is a powerful tank monitor and control system. • Full control from one central location on your...

EIGHT CHANNEL HOLDING TANK CONTROLLER SYSTEM LAYOUT FOR MODEL TC-8000 Any device can sit anywhere on this two core Bus cable. Any combination of HT-100/P and or HT-100 (up to eight) can be connected plus, any number of repeater displays (model RD-800). NOTE: The HT-100/P has the pump and valve option while the HT-100 does not. INPUT/OUTPUT CONTROLLER INPUT/OUTPUT CONTROLLER INPUT/OUTPUT CONTROLLER INPUT/OUTPUT CONTROLLER TANK SENSOR ELECTRIC VALVE WITH INTERLOCK SWITCH TANK SENSOR TANK FULL DISABLE OUTPUT TANK SENSOR ELECTRIC VALVE WITH INTERLOCK SWITCH TANK FULL DISABLE OUTPUT TANK SENSOR ELECTRIC...

Monitor and Control up to 4 tanks from one location. TM-4000 DISPLAY CONTROLLER: Is a powerful tank monitor system. • Full control from one central location on your boat. • Visual indication of tank level, seacock position & pump status. • Turn holding tank macerator pump on manually & off manually or automatically. • Turn water maker on/off manually or automatically. • All tanks are name programmable giving tank location and type, e.g. Aft Port, Grey Tank. • Two display modes available (see right). • Displays in Litres or Gallons and Percentage. • Backlight. HT-100 or HT-100/P : Is a controller...

FOUR CHANNEL HOLDING TANK MONITOR SYSTEM LAYOUT FOR MODEL TM-4000 Any device can sit anywhere on this two core Bus cable. Any combination of HT-100/P and or HT-100 (up to eight) can be connected plus, any number of repeater displays (model RM-400). NOTE: The HT-100/P has the pump and valve option while the HT-100 does not. DISPLAY MODES: MODEL HT-100/P INPUT/OUTPUT CONTROLLER TANK SENSOR INPUT CONTROLLER TANK SENSOR TANK FULL DISABLE OUTPUT TANK FULL DISABLE OUTPUT 2 CORE CABLE. MAX LENGTH 1000 METRES INPUT CONTROLLER INPUT CONTROLLER TANK SENSOR TANK FULL DISABLE OUTPUT ELECTRIC VALVE WITH INTERLOCK...

Monitor/Control up to 8 bilges from one location. The BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. The diagram (right) shows a typical system layout. The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters. BC- 8000 DISPLAY CONTROLLER: Is a powerful bilge control system. • Full control from one central location on your boat....