Fire Alarm System FR-4000Monitor up to 4 Zones The FR-4000 Fire Monitor provides an intelligent networked solution for the monitoring up of up to 4 zones. The system consists of the FR-4000 display (as seen above), one FR-100 8 zone sensor input unit, and up to two FEC-6 engine room relay units (optional). The system communicates via a 2-wire network cable with a maximum cable length of 1000 metres. FR-4000 DISPLAY UNIT Features include: • Full indication from one central location on your boat • Visual indication of fire or fault • Audible indication of fire or fault • Isolate any zone • All zone names programmable eg. saloon; engine room; upper deck; master cabin. • Backlight FR-100 The zone controller which manages the sensors. Features include: • 8 separate zone inputs (only 4 used for FR-4000) • Output relays x 2 • 10 A resistive @ 24VDC • Relay 1 and Relay 2 close on fire detection • Relay 2 opens when all zones OK FEC-6 The engine room controller unit (optional). Features include: • 6 relays • Output relay 1 to 4 = 10 A resistive @ 24VDC • Output relay 5 & 6 = 1 A resistive @ 30VDC • Relay 4 activated on a programmable timer • Relay 5 opens when alarm is muted • 4 inputs (for extinguisher cylinder empty/fill switches) Supply Voltage: 12 - 32 Volts DC (Auto sensing) | Quiescent Current: 12 milliamps (with backlight off) Backlight Reverse polarity protected | Network cable length = 1000m | Voltage & EMI protected Data retention: 50 years (without power) Smart Switch | PO Box 272 | Waikanae 5250 | New Zealand