Vector FinsTM program update 2023
4Pages

Vector FinsTM program update 2023 Fin design update of select models © SLEIPNER GROUP March 2023 www.sleipnergroup.com

SLEIPNER LAUNCH NEW VECTOR FINSTM MODELS 2023 Dear customers and partners We are proud to announce that we are now introducing new fin models that will replace our existing VF800, VF1350 and VF1650. The new fins are based on our VFS1950 model (2nd generation) with an integrated winglet and improved lift to drag ratio design, that further improves performance and effeciency. The new VFS1650 fin will come with 3 shaft position options, to optimize the performance at the prioritized speed. While the fin design has been optimized, the general dimension changes are small and the new model should...

Vector FinsTM model upgrades 2023 To be discontinued: Fin size: Replacement model: Fin size: For actuator: Please note that the CUT models will keep the same CUT profile as discontinued models. 3D step files for download VFS800 SB out Please note that the actuator and fin can be installed in any position (rotational) relative to each other and the hull, these models show the fin and actuator travel for fin and actuator assembled at 0° relative to each other. See installation manual for further installation guidelines. Need 3D step files for your next design? Please visit...

VECTOR FINSTM - SUPERIOR STABILISATION IN EVERY SITUATION 6 VFS1450 dimensions DRAWING FOR PUBLIC USE ©All rights reserved Contents of this document is the intellectual property of Sleipner Motor AS. It may not be copied or reproduced without written authorization by Sleipner Motor AS All dimensions are in mm, if not otherwise stated. Drawing by Sleipner Motor AS Title Stab. vector fin kit 0,8sqm Description Stabilizators All dimensions are in mm, if not otherwise stated. Title VFS 1450 BB Description General dimension comparison between fin models DRAWING FOR PUBLIC USE ©All rights...