SKF Vibracon - Quick Start Guide

1 / 2 PagesView full catalog

SKF Vibracon - Quick Start Guide

Product catalog summary

Benefits of SKF Vibracon Re-adjustable Steel Chock:

Eliminates the issue of 'Soft Foot'.
Reduces installation time.
Self-leveling capability.
Re-adjustable and reusable.
Fast chocking without curing time.
No special installation skills required.

Quick Start Guide:

Alignment Check: Ensure the component is properly aligned.
Adjustment of the Component: Make necessary adjustments to align the component.
Outcome of Adjustment: Identify any gaps that need filling.
Installation Check: Verify the installation process.
Foundation Check: Ensure the foundation is suitable for installation.
Installation of SKF Vibracon: Properly install the chock.
Batch Number Visibility: Ensure the batch number is visible for traceability.
Installation of Bolts: Follow the correct procedure for bolt installation.
Adjustment to Height: Adjust the chock to the required height.
Contact Area Check: Verify the contact area is adequate.
Maximum Height Check: Ensure the height does not exceed the maximum limit.
Release Vertical Adjustment Bolts: Release bolts as necessary.
OEM Bolt Tightening Sequence: Follow the recommended sequence for tightening bolts.
Release Horizontal Adjustment Bolts: Remove or lock the released adjustment bolts.
Final Alignment Check: Confirm the final alignment of the component.
Recommendations: Follow any additional recommendations provided.

Bolt Tightening Advice:

Apply 25% of the tightening torque initially.
Increase to 50% of the tightening torque.
Finally, apply 100% of the tightening torque.
Re-check after 24 hours of hot running.

Additional Information:

SKF is a registered trademark of the SKF Group.
Publication date: May 2016.
Contact: [email protected]
Website: www.vibracon.com

Catalog excerpts

Quick start guide 1. Alignment check of the component re-adjustable steel chock 3. Outcome of the adjustment: gaps to fill 7. Batch number in sight/front for traceability Eliminate the “Soft Foot” Save installation time Self leveling Re-adjustable / re-useable Chock fast, no curing No special installation skills required

Open the catalog to page 1

13. OEM bolt tightening sequence Related products Bolt tightening advice: 10. Check contact area A. 25% of tightening torque B. 50% of tightening torque C. 100% of tightening torque 14. Release horizontal adjustment bolts SKF spherical washers SKF Shaft Alignment Tools 2 11. Check maximum height 15. Check the final alignment Surface treated SKF Vibracon chocks SKF Vibracon low profile chock and spherical washer Downloads/Contact details: 12. Release vertical adjustment bolts [email protected] Bolt tightening advice: Re-check after 24 hot running hours 16. Recommendations Remove complete or lock,...

Open the catalog to page 2

SKF Vibracon - Quick Start Guide

SKF Vibracon - Quick Start Guide

Catalog excerpts

All SKF Solution Factory - Marine Services catalogs and brochures