*mynauticexpo

SG05 PRO

Product catalog summary

Overview: The SG05 Autopilot Computer Installation Guide provides detailed instructions for installing the SG05 autopilot systems compatible with various steering systems, including Volvo, Yamaha, and Optimus/CAN bus. The guide includes specifications, wiring examples, and parts lists for different kits.

Specifications: The SG05 Autopilot Computer has dimensions of 94.5 mm x 80 mm x 26 mm. It is designed to be mounted using the provided fixing screws and connected via SimNet connectors to the backbone and the Autopilot Gateway/Steering system.

Installation Procedures: The guide outlines the wiring examples for different configurations:

SG05 PRO: Connects to a Micro-C CAN bus backbone using T-Joiners and includes a SimNet to Micro-C drop cable. It is compatible with AP70 and AP80 control units and is Wheelmark approved when used in these systems.
SG05 Volvo/Yamaha: Includes a wiring example for Volvo or Yamaha systems, utilizing a Micro-C CAN bus backbone and a rate compass. It is compatible with various control units like OP10, QS80, AP24, and AP28.
SG05 Optimus: Designed for Optimus/CAN bus systems, it also uses a Micro-C CAN bus backbone and is compatible with the same control units as the Volvo/Yamaha setup.

Parts and Kits: Each kit includes specific components:

SG05 PRO Kit: Includes the autopilot computer, fixing screws, a Micro-C T-Joiner, and a SimNet to Micro-C drop cable.
SG05 Volvo/Yamaha Kit: Contains the autopilot computer, fixing screws, a Micro-C T-Joiner, a SimNet to Micro-C drop cable, and a rate compass with accessories.
SG05 Optimus Kit: Includes the autopilot computer and fixing screws.

Recommendations: Ensure compatibility with the steering system and control units before installation. Follow the wiring examples closely to ensure proper connectivity and functionality.

Catalog excerpts

Dimensions Used with the following Autopilot Control units Parts included with SG05 PRO (000-11479-001) SG05 PRO Autopilot computer SG05 Fixing screws Micro-C T-Joiner SimNet to Micro-C (male) Drop Cable SG05 AUTOPILOT COMPUTERS INSTALLATION GUIDE SG05 PRO Autopilot computer SG05 Fixing screws Micro-C T-Joiner SimNet to Micro-C (male) Drop Cable AC80S or AC80A Computer with accessories 26 mm (1.02") NOTE SG05 PRO is Wheelmark approved when used in an AP70 or AP80 Wheelmark approved system. SG05 PRO - Wiring example Compass Autopilot Control unit For technical speciﬁcations, certiﬁcates and declarations, refer to the product web site on: CAN BUS compatible steering system Thruster control Micro-C CAN bus backbone Micro-C T-Joiners SimNet to Micro-C (male) Drop cable SG05 Cable, female 1 SimNet connectors (to backbone) 2 To Autopilot Gateway/Steering system

Open the catalog to page 1

SG05 Autopilot Computer for Volvo/Yamaha SG05 Autopilot Computer for Optimus/CAN bus Used with the following Autopilot Control units Parts included with SG05 Volvo Autopilot computer and with Yamaha Autopilot computer (24006793) Used with the following Autopilot Control units Autopilot computer SG05 Fixing screws 1 SG05 Optimus Autopilot computer 2 SG05 Fixing screws Autopilot computer SG05 Fixing screws Micro-C T-Joiner SimNet to Micro-C (male) Drop Cable Volvo or Yamaha Autopilot Gateway RC42N Rate compass with accessories Parts included in SG05 Volvo AP Kit (000-10402-001) and in SG05 Yamaha...

Open the catalog to page 2

All Simrad Yachting catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list