CENTRAX & SIMPLEX Bulkhead Seals Centrax Bulkhead seals are the optimum solution For applications requiring a gas-tight and water-tight for watertight bulkheads up to 800mm, to protect seal, the Simplex-Compact lip-type bulkhead seal is adjoining spaces against flooding. used. The design is based on the Simplex-Compact forward seal. Two sealing rings facing each other act as a barrier chamber. This chamber is filled with oil and connected to a 4 l oil tank, and by means of the circulator a continuous lubrication and cooling is provided. This seal can also be supplied completely radially and axially split. Simplex-Compact Centrax Two segmented carbon rings which run directly on the shaft are mounted in an axially split housing made of All dimensions of the bulkhead seal, including recess, aluminium which is installed in the bulkhead opening. pitch circle and outer diameters can be adapted to the Two garter springs and a sectioned thrust ring ensure dimensions required to pass shaft flanges, couplings, proper contact of the sealing faces on the shaft and bearings etc. through the bulk head. The Simplex-Compact Bulkead Seal is available for Radial and axial shaft movements are taken up by the shaft diameters from 80mm to 1150mm. Centrax bulkhead seal without any problem. There Please contact us for engineering solutions for your is practically no wear owing to the efficient self- specific application. lubricating property of the carbon rings. ● MARINE ● PROPULSION ● SERVICES ● [email protected] ● +1 908 237 9099