525 UM
1Pages

Boat shown with options. The 525 UM was designed as a high performance commando boat. Its steep V-shaped stern allows high speeds which rformance can be maintained even when rapid intervention for instance, must be achieved in rough sea and swell, or in places where there is no access for conventional craft. The 525 UM is able to carry 12 persons. SPECIFICATIONS Overall length Overall width Weight Maximum power Capacity Maximum load CSM fabric 5 3.52 m (11.6’) 1.09 m (3.35’) 0.56 m (1.8’) 50 HP Black, grey, red, NATO green STANDARD FEATURES FLOATS The floats fabric is made of polyester support inside coated with Neoprene and outside coated with CSM. This fabric is labeled ORCA 1670 decitex. Hand-made assembly and double cold glue vulcanization by high skilled workforce are performed. An additional strip is glued at the edge of each panel junction as well as a strip inside all assembled parts in order to ensure a perfect watertight quality preventing from any leakage. The outer CSM coating is an elastomer resistant to heat and abrasion in opposition to the fabrics coated with plastomer (PVC). Thus, Sillinger uses fabrics of very strong resistance to extremely high or low temperatures. SILLINGER S.A.S ZI de Buray 41500 MER FRANCE Compartments number Internal length Internal width Float diameter Recommended power Colour of tubes - 1 Stainless steel bow handle - 6 Side belt handles - 1 Bow lifting point (if rigid keel) - 1 Towing ring - 1 Storage pocket - 1 Tank strap - 1 Engine fixing and protecting plate (wood and aluminium) - 1 Extra fabric 1100 dtx layer on the collar bow - 1 Transom stainless steel protection shoe - 1 Outer anti-chafing strip 160 mm wide - 2 Self bailers - 2 Beaching skids under floats - 2 Rings on transom - 1 Beaching strip under keel - 2 Handrails on boldrope - 2 Paddles - 2 Towing rings - 2 Carrying bags - 2 Stringers - 1 Polyurethane paint with a non skid top coat on a marine plywood floorboard - 1 Three parts rigid keel with stainless steel reinforcement or inflatable keel - 1 High flow foot pump - 1 Repair kit + pressure gauge - 1 Instructions manual Tel: +33(0)2-54-81-08-32 Fax: +33(0)2-54-81-32-95 E-mail: contact@sillinger.com Web: www.sillinger.com Sillinger, a Marck Group know-how