SIGMARINE 28 3 pages DESCRIPTION July 2009 Revision of May 2008 one component quick drying high build multi purpose zinc phosphate primer PRINCIPAL CHARACTERISTICS – – – – – – on board maintenance primer for above water areas easy application quick drying recoatable with various one and two component products surface tolerant good anticorrosive properties COLOURS AND GLOSS grey, redbrown, offwhite - at BASIC DATA AT 20°C (1 g/cm³ = 8.25 lb/US gal; 1 m²/l = 40.7 ft²/US gal) Mass density Volume solids VOC (supplied) 1.5 g/cm³ 55 ± 2% max. 266 g/kg (Directive 1999/13/EC, SED) max. 392 g/l (approx. 3.3 lb/gal) 75 µm per coat 7.3 m²/l for 75 µm 30 min. at 20°C, 2 hours at 5°C min. 4 hours * max. unlimited at least 12 months Recommended dry lm thickness Theoretical spreading rate Touch dry after Overcoating interval Shelf life (cool and dry place) RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES – steel; blast cleaned to ISO-Sa2½, blasting prole 40 - 70 µm – steel; power tool cleaned to min. ISO-St2 – substrate temperature should be above 5°C and at least 3°C above dew point SYSTEM SPECIFICATION marine INSTRUCTIONS FOR USE – stir well before use – the temperature of the paint should preferably be above 15°C, otherwise extra thinner may be required to obtain application viscosity – too much solvent results in reduced sag resistance – adequate ventilation must be maintained during application and curing (please refer to sheets 1433 and 1434) AIRLESS SPRAY Recommended thinner Volume of thinner Nozzle orice Nozzle pressure system sheets: 3102, 3103, 3104, 3105, 3107 Thinner 21-06 0 - 5%, depending on required thickness and application conditions approx. 0.38 - 0.48 mm (= 0.015 - 0.019 in) 12 - 16 MPa (= approx. 120 - 160 bar; 1700 - 2270 p.s.i.) page 1/3

SIGMARINE 28 July 2009 AIR SPRAY Recommended thinner Volume of thinner Nozzle orice Nozzle pressure Thinner 21-06 5 - 10%, depending on required thickness and application conditions approx. 1.7 - 2.0 mm 0.2 - 0.3 MPa (= approx. 2 - 3 bar; 28 - 43 p.s.i.) BRUSH/ROLLER Recommended thinner Volume of thinner Thinner 21-06 0 - 3% CLEANING SOLVENT Thinner 21-06 SAFETY PRECAUTIONS for paint and recommended thinners see safety sheets 1430, 1431 and relevant material safety data sheets this is a solvent borne paint and care should be taken to avoid inhalation of spray mist or vapour as well as contact...

SIGMARINE 28 July 2009 REFERENCES Explanation to product data sheets Safety indications Safety in conned spaces and health safety Explosion hazard - toxic hazard Safe working in conned spaces Directives for ventilation practice Cleaning of steel and removal of rust see information sheet 1411 see information sheet 1430 see information sheet 1431 see information sheet 1433 see information sheet 1434 see information sheet 1490 LIMITATION OF LIABILITY The information in this data sheet is based upon laboratory tests we believe to be accurate and is intended for guidance only. All recommendations...