Sidermarine catalog 2021
12Pages

{{requestButtons}}

Catalog excerpts

Sidermarine catalog 2021 - 2

SIDERMARINE - Established company in SHOCK ABSORBER production for mooring springs, swivel joints and more.  The patented MOORING SPRING, produced by SIDERMARINE in a special alloy of stainless steel, is extremely resistant and produces no noise, thanks to the antifriction and antisqueaking inserts.  The spring presents replaceable components and is highly resistant to marine corrosion and perfectly adaptable to different loads of stress.  Thanks to the wide range of sizes it achieves high performances for all types of vessels.  The overall cushioning, at 60-70%, is given by the...

Open the catalog to page 2
Sidermarine catalog 2021 - 3

MOORING SPRINGS TECHNICAL DESCRIPTION MPP SERIES Boat Weight Spring Diameter Damping force increased elastomer 105 Kg The loads of cushioning (Damping force) are increased in the models with inserts Mollaflex-Elastomer. It is recommended to use the model of the upper range when it is at the limit of the band. Sidermarine exonerates from any responsibility or replacement under warranty in case of purchase of a spring not suitable for the weight of the boat and therefore undersize.

Open the catalog to page 3
Sidermarine catalog 2021 - 4

HIBRID MOORING SPRINGS TECHNICAL DESCRIPTION MK SERIES Our patented HYBRID shock absorber has been studied, in every technical detail, to absorb the small and large fluctuations caused by sudden situations of bad weather, storms and strong perturbations. Our hybrid shock absorbers develop their capabilities in three stages. The central spring, made of very high characteristics stainless steel, has the function of absorbing the small and medium undertow in the harbors, considerably lightening the load generated by it so as not to stress the cleats, causing any breakage, giving the boat a...

Open the catalog to page 4
Sidermarine catalog 2021 - 5

OUR BRAND-NEW SWIVEL JOINT FOR ANCHORS SWIVELMARINE SAYS STOP TO LOW-QUALITY PRODUCTS! SWIVELMARINE® Nautical accessory of the utmost importance for boat and crew SAFETY. Swivel joints need to satisfy some fundamental requirements in order to ensure safety. Sidermarine has succeeded in designing and patenting these features, being therefore able to ensure boat owners’ safety and tranquility when the boat is anchored. Joints present now on the market are produced and distributed with a design and material quality which are absolutely inadequate to their purposes.

Open the catalog to page 5
Sidermarine catalog 2021 - 6

SWM 8 Max - SWM 10 Model - Integral anchor and chain body . Aisi 316 stainless steel. - Rotation on bronze anti-friction organs with very high characteristics. -Stainless steel 17 4 PH Central Pivot pin (stainless steel with characteristics of high tensile strength-highly superior to any other existing stainless steel) -Chain side pins and anchor side pins with special steel 17 4 PH self-locking shape. - Very high characteristics bronze anti-friction side bushing. -n°2 stainless steel radial screws with copper insert for additional safety locking. SWM 12 L Max- SWM 22 Model -Integral anchor...

Open the catalog to page 6
Sidermarine catalog 2021 - 7

TECHNICAL DESCRIPTION OF SWIVELMARINE® CHAIN SIDE ANCHOR SIDE ØH= diameter with anti-friction bushing ØD= diameter without anti-friction bushing TECHNICAL DATA AND DIMENSIONS SWIVELMARINE® (Dimentions mm) Grade 70 CHAIN SET UP Model Overall Size To complete the assembly, Sidermarine provides the locking pivots with related anti-friction bronze bushing for the anchor side, properly identified. Loctite 243-245 must be applied on the threading, and then the pivots must be strongly blocked. VERY IMPORTANT: All the process must be carried out without lubrication. To complete the installation of...

Open the catalog to page 7
Sidermarine catalog 2021 - 8

Swivel Joint for anchor SWIVELMARINE® Sidermarine supplies the group already assembled: - Blocked with Loctite 270 - Lubricated with solid white Tuflub fat. When assembling the Chain-Anchor at the yard, proceed as follows: SwivelMarine Model 8 Max ° Chain side pin- Anchor side pin: Apply a small amount of Loctite 270 or equivalent on the threaded part; tighten with a torque of 40 Nm. SwivelMarine Model 10 ° Chain side pin- Anchor side pin: Apply a small amount of Loctite 270 or equivalent on the threaded part; tighten with a torque of 40 Nm. These operations must be carried out without...

Open the catalog to page 8
Sidermarine catalog 2021 - 9

Swivel Joint for anchor SWIVELMARINE® Model 12 L Gr 70 Sidermarine supplies the group already assembled: - Blocked with Loctite 270 - Lubricated with solid white Tuflub fat. When assembling the Chain-Anchor at the yard, proceed as follows: ° Chain side pin: Apply a small amount of Loctite 270 or equivalent on the threaded part; tighten with a torque of 60 Nm. ° Anchor side pin: Apply a small amount of Loctite 270 or equivalent on the threaded part; tighten with a torque of 90 Nm. These operations must be carried out without using any lubricant. Sidermarine is exempt from any responsabily or...

Open the catalog to page 9
Sidermarine catalog 2021 - 10

Swivel Joint for anchor SWIVELMARINE® Model 16-22 During the chain-anchor assembly phase at the construction site, perform the following procedure. CHAIN SIDE: 1 Insert ØD1 pin 2 Insert conical pin locking it in its place. 3 Conduct lead into the taper pin hole. ANCHOR SIDE: 1 Insert ØD pin with the bushing H 2 Insert conical pin and lock it in its place 3 Conduct lead into the taper pin hole. Sidermarine is exempt from any responsabily or replacement under warranty in case of purchase of an undersized swivel joint, which is misused, which is not designed for recreational use and for an...

Open the catalog to page 10
Sidermarine catalog 2021 - 11

SIDERANCHOR ® Sidermarine, which produces high-quality swivel joints, launches on the market its brand new anchor SIDERANCHOR, which, at first glance, has a traditional shape but is indeed designed to enclose the best features of a convex anchor ( Called plough) with a concave sides. Its design increases the ability to compress, collect and penetrate the substrate by about 40%. - 100% 316 Stainless steel - Concentrated weight at the anchor tip accounting for nearly 40% of the total weight. - The concave fins integrated with anchor’s convex shape increase the anchor grip by 40% in comparison...

Open the catalog to page 11

All SIDERMARINE S.R.L. catalogs and brochures

  1. LEAFLET

    12 Pages