Catalogs >
Side-Power >
SH320

SH320
4Pages

Catalog excerpts

SIDE-POWER Thruster Systems Product Specifications sheet SH320 UPGRADED MODEL 06/2018 Light duty thrust: (kg / lbs) 320 / 705 Heavy duty thrust: (kg / lbs) 290 / 639 Hydraulic power: (kW / hp) 21,2 / 28,4 Oil flow: (l/min / US g/min) 45,6 / 12,05 A P: (bar / PSI) 279 / 4047 Preferred motor option: 16ccm piston Actual performances will vary for each installation depending on several factors. Light duty: Typical leisure boat use. Docking mainly. Heavy duty: Commercial vessels with extended run times and in rougher condition. Product specification - SH Series 5287-3 2018

Open the catalog to page 1

Thruster Systems 2. Technical details: Motor type: Hydraulic Gear leg material: Seawater resistant bronze Gears: Hardend precision gears Lubrication: Pre-filled long-life gear oil, sealed gear leg, no change or inspection needed. Bearings: Angular contact ball bearing at propeller shaft and combination of ball bearing and needle bearing at driveshaft. Galvanic protection: Galvanic separation from hull + anode outside protection Motor bracket material: Seawater resistant aluminium Propellers: 5-blade low noise skew Q-propTM Mechanical safety: Flexible coupling between hydraulic motor and...

Open the catalog to page 2

TECH INFO 4. Maintenance: • Seasonal service should include change of anodes and checking that all bolts are tighten(motor/ motor bracket - propeller). See User and Installation manual for more detailed information. • Hydraulic motor: See User and Installation manual for more information. 5. Material hazards: • Hydraulic Motor: There are no hazardous materials in this product, ref material declaration. • Gearleg: Gear oil that needs to be kept away from fire. • General precautionary measures must be taken during installation and inspections. 6. Health and safety: • Gearleg and Hydraulic...

Open the catalog to page 3

TECH INFO Product upgrade information - benefits of SH320 vs. discontinued model SP300 1. New gear leg: The gear leg has been redesigned to be slimmer and without bolt-ears to further improve the water flow and reduce the water turbulence resulting in better performance and efficiency. There are also some production oriented improvements internally to further safeguard the very high tolerance level in the machining and assembly processes of a Side-Power thruster. 2. Sealed gear leg: The gear leg now has ceramic axial shaft seals improving lifetime and durability, thereby allowing them to...

Open the catalog to page 4