Shrink Discs RLK 608 - 4 Pages

Add to MyNauticExpo favorites
Shrink Discs RLK 608

Catalog excerpts

Shrink Discs RLK 608 two-part design highest transmissible torques Features • Highest transmissible torques • Easy, quick assembly by tightening clamping screws without a torque wrench • Distance-controlled assembly ensures guaranteed transmissible torques • Enclosed design, therefore impervious to dirt • True running even at high speeds • Centres the hollow shaft or hub to the shaft • For hollow shafts or hubs with outer diameters of 30 mm up to 620 mm Application example Backlash free connection of a hollow-shaft gearbox to a machine shaft with a Shrink Disc RLK 608. The backlash free connection reduces the risk of fretting corrosion. As a result, the connection can be easily disassembled even after long periods of operation. Transmissible torques and axial forces The transmissible torques or axial forces listed on pages 13 through 15 are subject to the following tolerances, surface characteristics and material requirements. Please contact us in the case of deviations. Tolerances dw > mm 24 30 50 80 120 160 180 250 315 Hollow shaft bore ISO Other fits may be selected, provided the joint clearance between the shaft and the hollow shaft remains within the indicated ranges. Surfaces Average surface roughness at the contact surfaces between the shaft and the hollow shaft Rz = 10 … 25 µm. Materials The following apply to the shaft and the hollow shaft: • Yield strength Re ≥ 360 N/mm2 • E-module ca. 206 kN/mm2 Simultaneous transmission of torque and axial force The transmissible torques M which are shown in the tables apply for axial forces F = 0 kN and conversely, the indicated axial forces F apply to torques M = 0 Nm. If torque and axial force are to be transmitted simultaneously, the transmissible torque and the transmissible axial force are reduced. Please refer to the technical points on pages 28 and 29. Example for ordering Shrink Disc RLK 608 for hollow shaft with an outer diameter d = 155 mm: • RLK 608-155 Article number 4200-155801-000000 Installation Please request our installation and operating instructions for

 Open the catalog to page 1

Shrink Discs RLK 608 two-part design highest transmissible torques Shrink Disc released Shrink Disc clamped 13-1 Technical Data Article number Weight

 Open the catalog to page 2

Shrink Discs RLK 608 two-part design highest transmissible torques Shrink Disc released Shrink Disc clamped 14-1 Technical Data Article number Weight

 Open the catalog to page 3

Shrink Discs RLK 608 two-part design highest transmissible torques Shrink Disc released Shrink Disc clamped 15-1 Technical Data Article number Weight

 Open the catalog to page 4

All SIAM RINGSPANN catalogs and brochures

  1. Covers

    1 Pages

  2. Mining

    9 Pages