Shrink Discs RLK 606 - 3 Pages

Add to MyNauticExpo favorites
Shrink Discs RLK 606

Catalog excerpts

Shrink Discs RLK 606 two-part design high transmissible torques Features • High transmissible torques • Easy, quick assembly by tightening clamping screws without a torque wrench • Distance-controlled assembly ensures guaranteed transmissible torques • Enclosed design, therefore impervious to dirt • True running even at high speeds • Centres the hollow shaft or hub to the shaft • For hollow shafts or hubs with outer diameters of 24 mm up to 155 mm Application example Backlash free connection of a bevel spur gear to a drive shaft of a gearbox with a Shrink Disc RLK 606. The backlash free connection permits extended reversing operations. Transmissible torques and axial forces The transmissible torques or axial forces listed on pages 17 through 18 are subject to the following tolerances, surface characteristics and material requirement. Please contact us in the case of deviations. Surfaces Average surface roughness at the contact surfaces between the shaft and the hollow shaft Rz = 10 … 25 µm. Materials Simultaneous transmission of torque and axial force Hollow shaft bore ISO Other fits may be selected, provided the joint clearance between the shaft and the hollow shaft remains within the indicated ranges. The following apply to the shaft and the hollow shaft: • Yield strength Re ≥ 340 N/mm2 • E-module ca. 206 kN/mm2 Installation Please request our installation and operating instructions for Shrink Discs RLK 606. The transmissible torques M which are shown in the tables apply for axial forces F = 0 kN and conversely, the indicated axial forces F apply to torques M = 0 Nm. If torque and axial force are to be transmitted simultaneously, the transmissible torque and the transmissible axial force are reduced. Please refer to the technical points on pages 28 and 29. Example for ordering Shrink Disc RLK 606 for hollow shaft with an outer diameter d = 100 mm: • RLK 606-100 Article n

 Open the catalog to page 1

Shrink Discs RLK 606 two-part design high transmissible torques Shrink Disc released Shrink Disc clamped 17-1 Technical Data Article number Weight

 Open the catalog to page 2

Shrink Discs RLK 606 two-part design high transmissible torques Shrink Disc released Shrink Disc clamped 18-1 Technical Data Article number Weight

 Open the catalog to page 3

All SIAM RINGSPANN catalogs and brochures

  1. Covers

    1 Pages

  2. Mining

    9 Pages