1. Catalogs
  2. Shurflo
  3. pds-700 BILGE PUMP 355-110-00

pds-700 BILGE PUMP 355-110-00

pds-700 BILGE PUMP 355-110-00

pds-700 BILGE PUMP 355-110-00

Product catalog summary
Application: The pump is designed for 12V marine bilge water evacuation.
Pump Specifications: It is a centrifugal pump with a 3/4” barb port, suitable for liquids up to 130 °F (54 °C). It requires a flooded inlet and cannot run dry.
Electrical Specifications: The pump uses a 12VDC permanent magnet motor for continuous duty. It requires an external 5 Amp fuse (not supplied) and has 3 ft (0.9M) tinned, 16 AWG leads. No control is included.
Materials: The housing is made of ABS, the impeller is high-strength nylon, and the hardware is stainless steel.
Approvals: The pump is ignition protected (8846, CE).
Warranty: It comes with a 3-year limited warranty.
Shipping Details: Each pump weighs 1.25 lb (0.56 kg). A carton contains 24 pumps, weighing approximately 30 lb (13.6 kg) with dimensions of 24”L x 18”W x 11”H (61cm x 46cm x 28cm).
Performance: At 0 ft head, the flow is 726 GPH (2747 LPH) with a current of 3.90 Amps. At 4 ft head, the flow is 420 GPH (1589 LPH) with a current of 3.86 Amps. At 8 ft head, the flow is 110 GPH (416 LPH) with a current of 3.70 Amps.
Contact Information: SHURflo is located at 5900 Katella Ave, Cypress, CA 90630. Phone: (800) 854-3218, Fax: (562) 795-7564. Website: www.shurflo.com.
See more

Catalog excerpts

pds-700 BILGE PUMP 355-110-00-1

MARINE PRODUCT DATA SHEET OEM: AFTERMARKET: 355-110-00 (700 GPH) 355-110-10 (700 GPH) APPLICATION 12V Marine Bilge Water Evacuation PUMP Type: Port: Liquid: Prime: Run Dry: Centrifugal Pump 3/4” Barb 130 °F [54 °C] Max Flooded Inlet No ELECTRICAL Motor: 12VDC Permanent Magnet, Continuous Duty Protection: Need External Fuse (Not supplied) Leads: 3 ft [0.9M] Tinned, 16 AWG Fuse: 5 Amp Recommended Control: No Control MATERIALS Housing: ABS Impeller: High Strength Nylon Hardware: Stainless Steel APPROVALS Ignition Protected 8846, CE Quality bilge pumps you can trust. SHURflo bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3’ Tinned Wire Assembly for above waterline installations and water cooled motors for extended life. WARRANTY 3 Year Limited Warranty. Contact SHURflo for details SHIPPING Net Weight (unboxed): Approx. Lbs./Ctn.: Pumps in Carton: Carton Size: 1.25 Lb [0.56 Kg] each 30 Lb [13.6 Kg] 24 24”L x 18”W x 11” H [61cm x 46 cm x 28 cm] RELATED DOCUMENTS Catalog: MS-030-140 Installation Manual: 911-758 Applications Spec Guide: MS-020-005 Replacement Kit P/# 94-750-00 Page 1 of 2

 Open the catalog to page 1
pds-700 BILGE PUMP 355-110-00-2

TYPICAL PERFORMANCE PRESSURE METERS FT OF HEAD 0.0 1.20 2.40 FLOW GPH LPH 726 420 110 0 4 8 CURRENT AMPS 2747 1589 416 3.90 3.86 3.70 FLOW AMPS 4.00 HEAD/LIFT (FT) 8.0 3.00 6.0 2.00 4.0 1.00 2.0 0.0 100 0.00 150 200 250 300 350 400 450 500 550 600 650 700 750 FLOW (GPH) DIMENSIONS [mm] Visit our Web Site at http://www.shurflo.com Shurflo reserves the right to update specifications, change prices, or make substitutions without notice. SHURflo 5900 Katella Avenue Cypress, CA 90630 Phone (562) 795-5200 Toll Free (800) 854-3218 Fax (562) 795-7564 SHURflo East 52748 Park Six Court Elkhart, IN 46514-5427...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.