CONCRETE PONTOON TYPE SF1000 A concrete pontoon from SF MARINA provides the highest possible standard and comfort. The heavy weight makes it extremely stable and low centre of gravity. As a result of the use of high quality materials, coupled with a thorough manufacturing process, the pontoon enjoys a long life-span. The pontoon is built to cope with arctic as well as tropical conditions. Type SF1000 can be used universally in sheltered and semi-sheltered locations where there is a requirement for high quality and stability. The pontoon also has good wave-dampening characteristics. The all concrete and styrofoam design of the pontoon produces a very high degree of buoyancy. It is practically maintenance-free and has little or no impact upon nature and the environment. Each standard pontoon is designed to accept electrical and water supply services. Normally, the pontoons would be anchored using chains and anchor blocks. As an alternative, they could be anchored on piles. With our patented connector system the pontoons can be connected longitudinally and at angles without the necessity of intermediate gangways. S P E C I F I C AT I O N S The pontoons are manufactured in accordance with the Eurocode SS-EN-1992-1-1 SF1124 9.95, 11.96, 14.96, 19.96, 24.96m Width: Incl. fender 2.65 m Width: Excl. fender 2.4 m Height: 1.1 m Weight: Approx. 14, 16, 18, 26, 32 tons Freeboard: Approx. 0.5 m* Buoyancy: Approx. 500kg/m² Connectors: 2 units type W 200/250 per joint Breaking load: W 200: 2 x 35 tons per joint Breaking load: W 250: 2 x 70 tons per joint 9.95, 11.96, 14.96, 19.96, 24.96m Width: Incl. fender 3.25 m Width: Excl. fender 3.0 m Height: 1.0 m Weight: Approx. 14, 17, 22, 28, 38 tons Freeboard: Approx. 0.5 m Buoyancy: Approx. 500kg/m² Connectors: 2 units type W 200/300 per joint Breaking load: W 200: 2 x 35 tons per joint Breaking load: W 300: 2 x 70 tons per joint 9.95, 11.96, 14.96, 19.96, 24.96 m Width: Incl. fender 4.25 m Width: Excl. fender 4.0 m Height: 1.0 m Weight: Approx. 18, 22, 28, 38, 50 tons Freeboard: Approx. 0.5 m Buoyancy: Approx. 500kg/m² Connectors: 2 units W 200/300 per joint Breaking load: W 200: 2 x 35 tons per joint Breaking load: W 300: 2 x 70 tons per joint 9.95, 11.96, 14.96, 19.96, 24.96 m Width: Incl. fender 5.25 m Width: Excl. fender 5.0 m Height: 1.0 m Weight: Approx. 25, 30, 38, 50, 63 tons Freeboard: Approx. 0.5 m Buoyancy: Approx. 500kg/m² Connectors: 2 units W 200/300 per joint Breaking load: W 200: 2 x 35 tons per joint Breaking load: W 300: 2 x 70 tons per joint Concrete pontoons: Concrete: C40/50. Air 6%. Wcr< 0.4. Reinforcement: Nps 500, K500 C-T. EPS: min. 65kPa. Cast-in materials: Stainless and hot-dipped galvanised steel. Wood fender: Pressure-treated pine 95 x 145 mm. Other dimensions can be offered upon request. We reserve the right to change the design without notifying. www.sfmarina.com [email protected]