An all-concrete pontoon from SF MARINA provides the highest possible standard and comfort. The heavy weight makes it extremely stable and low centre of gravity. As a result of the use of high quality materials, coupled with a thorough manufacturing process, the pontoon enjoys a long life-span. The pontoon is built to cope with Scandinavian climate and to withstand the autumn hurricanes and harsh winters. Type SF 1800 can be used universally where the potential of heavy duty pontoon with very high freeboard, approx. 1.0 m. can be utilized, such as commercial docks, fishing harbours, ferrylandings etc. The pontoon also has good wave-dampening characteristics. The all concrete and styrofoam construction of the pontoon relults in a very high degree of buoyancy thus making it virtually unsinkable. It is practically maintenance-free and has little or no impact upon Nature and the Environment. Each standard pontoon is designed to accept electrical and water supply services. Normally, the pontoons would be moored using chains and blocks. As an alternative, they could be connected to piles. With our patented connector the pontoons can be connected longitudinally and at angles without the necessity of intermediate gangways. - SPECIFICATIONS - The pontoon is manufactured in accordance with the Swedish Concrete Standards BBK 04 SF1850 Length: Width: Width: Height: Weight: Freeboard: Buoyancy: Connectors: Breaking load: SF1860 Length: Width: Width: Height: Weight: Freeboard: Buoyancy: Connectors: Breaking load: SF1880 Length: Width: Width: Height: Weight: Freeboard: Buoyancy: Connectors: Breaking load: All-concrete pontoons: Concrete: C40/50. Air 6%. Wcr< 0.4. Reinforcement: Nps 500,B 500, Ks 600. Styrofoam: min. 80kPa. Cast-in materials: Stainless or hot-dipped galvanised steel. Wood fender: Pressure-treated pine 95 x 145 mm. Other dimensions can be offered upon request. We reserve the right to change the design without notifying. www.sfmarina.com [email protected]