GENNAKER BOWSPRIT • Gives the gennaker more clear air • Facilitates rapid gybing • Always ready for quick extension • Makes for fast and efficient gennaker handling • Improves performance when gennaker sailing • Can be fitted to most yachts • Available in carbon or aluminium Extendable gennaker bowsprit. Sold as a kit for deck mounting. Just fit the two stainless steel pad eyes to the deck in line with the bow bracket. This bracket is a stain- less ring with a low friction polyamide inner lining through which the bowsprit slides into the "active" position. After the gennaker is doused, the bowsprit can slide back and be secured to the aft eye. If required, it can be quickly removed and stowed securely below. The gennaker tackline runs through the bowsprit, ente- ring and leaving via well rounded holes, and then aft to the cockpit. An alternative is to fit an external tack block • Aluminium or carbon bowsprit section • Inboard end fitting with plunger • 2 stainless steel pad eyes (508-750-01) Bowsprit kits

Bow bracket integrated with bow anchor fitting. Dimensioning (Not applicable for "Code 0" = straight luff) Service Load Seidell Mast Inc., USA Tel +1 843-760-6278. Fax +1 843-760-1220. e-mail [email protected] Seldén Mid Europe B.V., Netherlands Tel +31 (0) 111-698 120. Fax +31 (0) 111-698 130. e-mail [email protected]