video corpo

SELDÉN GX
2Pages

{{requestButtons}}

Catalog excerpts

SELDÉN GX - 1

Furling systems for asymmetric spinnakers and cruising chutes This is all about enjoyment! For every sailor who is thrilled by boat speed in combination with fast and easy sail handling, Seldén GX is a new extra member of the crew. Unfurling an asymmetric spinnaker will give you instant gratification in terms of sailing performance and true sailing pleasure. In light winds you can have the furled sail hoisted, ready for action. Once you are off the wind you simply release the furling line and pull on the sheet and the asymmetric spinnaker unfurls while you remain in the safety of the cockpit. You can enjoy this type of sail from about 70° apparent wind angle and when sailing dead down wind you pole it out to windward, preferably with a telescopic whisker pole. So, with a jib and an asymmetric spinnaker your performance is optimized for all wind angles. At the end of the day the furled sail is a neat, tight roll which is simple to bag and stows An asymmetric spinnaker with a mid girth of minimum 75% of the foot length measures as a regular down wind sail. This means you can combine it with your regular spinnakers without penalty within the ORCi and IRC rules. Just imagine what difference this will make to your sailing performance in the borderland between jib and spinnaker. A real game changer! The sail is attached to the freely rotating tack swivel on the drum and to the halyard swivel while the luff is free flying. A rigid anti-torsion line connects the drum and the halyard swivel. When turning the drum the anti-torsion line makes the top of the sail furl first, while the tack is independent on its swivel. This makes for a tightly furled sail from

Open the catalog to page 1
SELDÉN GX - 2

Lower bearing assembly Halyard swivel All structural parts are made of high-strength duplex stainless steel which has 50% higher breaking load than 316 stainless steel. This means less material and lower weight. Glass flbre/PA composite for strength and low weight. Metal "teeth" make for a good grip on the line when furling The sail Is attached with a Dyneema® loop surrounding Tack swivel with Torlorï8 ball bearings. A narrow line guide fitting leads the line on to the line driver and gives a good grip. A wedge shaped line stripper separates the rope from the line driver when unfurling the...

Open the catalog to page 2

All Seldén Mast AB catalogs and brochures

  1. Furlex 50S

    2 Pages

  2. Carbon Spars

    11 Pages

  3. Furlex 500S

    2 Pages

  4. Furlex 100S

    2 Pages

  5. Keelboat masts

    28 Pages

  6. Carbon masts

    2 Pages

  7. mast section

    3 Pages

  8. Furling mast

    16 Pages

  9. FURLEX 20S

    2 Pages

  10. Rodkicker

    8 Pages

  11. SELDÉN CX

    2 Pages

Archived catalogs

  1. Mats

    19 Pages