video corpo

Product Catalogue, YACHT


Catalog excerpts

Product Catalogue, YACHT - 1

Seldén Mast AB, Sweden e-mail Seldén Mast Limited, UK e-mail e-mail Seldén Mast A/S, Denmark e-mail e-mail Seldén Mast SAS, France e-mail The Seldén Group is the world's leading manu- facturer of masts and rigging systems in carbon and aluminium for dinghies, keelboats and yachts. The Group consists of Seldén Mast AB in Sweden, Seldén Mast A/S in Denmark, Seldén Mast Ltd in the UK, Seldén Mid Europe B.V. in the Netherlands, Seldén Mast SAS in France and Seldén Mast Inc. in the USA. Our well known brands are Seldén and Furlex. The worldwide success of Furlex has enabled us to build a network of over 750 authorised dealers covering the world's marine markets. So wherever you sail, you can be sure of fast access to our service, spare parts and know-how. product catalogue Rig solutions for yachts ranging from approximately 25 to 80 feet.

Open the catalog to page 1
Product Catalogue, YACHT - 2

Furling masts manual, hydraulic and electric drive Furlex jib furling and reefing system Spinnaker poles and accessories Just smart At your service. Useful publications Conversion factors Contents in alphabetical order The information and specifications contained in this catalogue are subject to change without prior notice.

Open the catalog to page 2
Product Catalogue, YACHT - 3

Making the best yacht rig systems in the world is only part of our business. With 6 medals in the latest Olympics and numerous World Championship, European Championship and national event medals, Seldén has also proved to be Number One in rig systems for dinghies and keelboats. So no matter the size of your boat, whether you push your equipment to the very limit, or just enjoy leisurely cruising, go Seldén and you'll benefit from reliable top-class gear.

Open the catalog to page 3
Product Catalogue, YACHT - 4

Right from the start Heeling test introduced in 1965, 30° of heel to determine the righting moment Seldén was founded in 1960. What started as a five-man operation has grown into world market leadership, with mast manufacturing in Europe and in the USA. We still perform the same kind of heeling tests today as we did in 1965. The only difference is that our instruments, tools and production methods have been developed and refined in order to meet the demands of cost-effective quality manufacturing, as well as the demands of serious yachts- men all over the world. We did things right from the...

Open the catalog to page 4
Product Catalogue, YACHT - 5

Leaders in every detail Every Seldén rig is carefully thought out, down to the last detail. All the way from the materials and functions of the different parts of the rig, to dimensioning the right rig for each individual boat. Each individual component contributes to the performance of the whole rig. That is the Seldén way - experienced yachtsmen behind every aspect of design, product development and production. All our standard rigs are custom made Extruded aluminium is an excellent material for making masts. This is where Seldén has earned its reputation as world leader in mast making....

Open the catalog to page 5
Product Catalogue, YACHT - 6

Mast sections Loads generated by the crew (mainsheet, vang, outhaul, Cunningham etc.) are transferred to the mainsail and on to the mast. As the mainsail is designed according to the expected curve of the mast, a longitudinally stiff mast allows for less luff curve of the sail. Instead, this sail area can be added to the roach of the sail, where it is subjected to the wind and more efficient. The longitudinal rigidity of the mast section makes for higher forestay load created by tensioning the backstay. Running backstays can often be avoided. The risk of mast pumping is also ' If a...

Open the catalog to page 6
Product Catalogue, YACHT - 7

Mast sections E-sections, D-sections and R-sections Our older types of mast sections are no longer in production. But we stock a full range of spare parts and accessories for these masts. Please note that the mast section is always the key for correctly identifying the parts you are looking for. Minor diameter Mast section measurements are given as follows: Major diameter/Minor diameter (i.e. 170/115). Take note of the mast shape. This will help identi- fication and the use of correct measurements. The major diameter of the mast can usually be found in the number engraved at the mast heel....

Open the catalog to page 7
Product Catalogue, YACHT - 8

Seldén carbon spars – almost like flying 12 13

Open the catalog to page 8
Product Catalogue, YACHT - 9

Seldén carbon spars For everyone who cannot resist speed It's no coincidence that carbon fibre is used in aeroplanes. Carbon composite combines stiffness and strength with low weight. Seldén low-weight carbon spars have accentuated longitudinal stiffness. This means that forestay tension can be substantially increased. All experienced racing sailors know what this means in terms of increased performance. The combination of greater stiffness and reduced weight will bring you beyond the speed limits. Seldén have developed a unique fila- ment winding process to produce top quality carbon...

Open the catalog to page 9
Product Catalogue, YACHT - 10

The headboxes are equipped with a new type of separator, to make it easy to access the top sheaves. Just loosen the separator, which also works as a locking plate, and the sheaves can easily be lifted up for inspection or replacement. This means that you can replace the sheaves without unstepping the mast and removing the headbox. The separator is slightly angled at its front end to lead the spinnaker hal- yard on to the sheave. The headbox fitting has a gently rounded halyard lead for a masthead spinnaker or gennaker. Conventional spinnaker arrangement with one or two halyard blocks is, of...

Open the catalog to page 10
Product Catalogue, YACHT - 11

Headbox fittings Dimensions Notes fitted on aft edge of headbox. For 15° headboxes, bend crane (white) lamp. anchor light. Instrument base Instrument base anchor light base. Windex extension lamp and anchor light. nstrument base wings with support strut. To be combined with the following brackets: Length = 500 mm For 0° headbox without base. For 15° headbox shall base Does the roach of your mainsail stick to your backstay? Just add a backstay flicker. Then, when you release the backstay tension, the flicker will lift the stay and free the To replace sheaves in headboxes prior to 2003...

Open the catalog to page 11

All Seldén Mast AB catalogs and brochures

  1. Furlex 50S

    2 Pages

  2. Carbon Spars

    11 Pages

  3. Furlex 500S

    2 Pages

  4. Furlex 100S

    2 Pages

  5. Keelboat masts

    28 Pages

  6. Carbon masts

    2 Pages

  7. mast section

    3 Pages

  8. Furling mast

    16 Pages

  9. FURLEX 20S

    2 Pages

  10. Rodkicker

    8 Pages


    2 Pages


    2 Pages

Archived catalogs

  1. Mats

    19 Pages