video corpo

furling masts
6Pages

{{requestButtons}}

Catalog excerpts

furling masts - 1

Let your rig do the hard work Simple You hoist the sail just once a season, so a small crew can manage a much larger boat. Easy A Seldén furling mast makes it easy to unroll and set your mainsail. Rolling it in is just as quick and easy. As your sail is neatly stowed out of the way the instant it is rolled in, you have a clear view when manoeuvring under power. Safe You can set your sail to suit the wea­ her conditions, t from the safety of the cockpit. Efficient By furling the sail vertically into the mast, you don’t have to furl very much to get a substantial decrease of the sail area.

Open the catalog to page 1
furling masts - 2

Well balanced There are no fixed reef points, so the number of combinations between furling genoa and main are unlimited. More enjoyable Due to the easy handling, with a furling mast you will do more sailing and less motoring. Vertical battens allow for a positive roach on the furling mainsail. A fine combination of performance and convenience.

Open the catalog to page 2
furling masts - 3

Cable conduits Sail guide (optional) Guide flange Spare luff groove The sail slot is wide and asymmetrically located to reduce friction between the mast and the sail The Seldén furling principle The wide sail slot allows for vertical battens and a positive roach of the main sail. The actual sail slot is placed asymmetrically to reduce furling resistance and to lead the sail straight on to the internal luff extrusion. Cross-section of a Seldén furling mast. The furling system is based on Seldén’s proven technology. Geared line driver winch, tensioned luff extrusion, asymmetrically located...

Open the catalog to page 3
furling masts - 4

to operate • Easy an outhaul line for rolling out the sail, and an There is endless line for rolling it in. It’s as simple as it sounds. Or if you wish, you can operate the sail at the mast using a winch handle. The geared reefing winch mechanism runs on ball bearings, so it takes little effort to roll in the sail. Greasing holes in the mast facilitate maintenance. • Accessibleon the port side of the mast allow for Two oval holes easy access to the tack attachment, sail feed, tensioning screw and halyard swivel. Just remove the composite covers and the rest speaks for itself. You can...

Open the catalog to page 4
furling masts - 5

The Seldén load d ­ istributor prevents… … point loading! Asymmetric sail slot wide enough for vertical battens. Extra long guide flange. Optional sail guide for sails with horisontal battens. Seldén’s unique load distributor The furling mechanism rotates easily even under high load. This is largely due to the unique bearing system in the halyard swivel, which was originally developed for the Furlex jib furling ­ ystem. s The cleverly designed load distributor has three fulcrums, distributing the load over the entire bearing race and all the bearings, rather than over small areas of the...

Open the catalog to page 5
furling masts - 6

Low friction The asymmetric design and large radius edges of the slot reduce sail friction, making it much easier to roll the sail in and out. The sail groove on the luff extrusion is located asymmetrically to help the sail furl easily around the extrusion. In addition, the rotating luff extrusion is tensioned and fitted with ball bearings top and bottom. This reduces friction between the sail and the inside of the sail com­ artment. p

Open the catalog to page 6

All Seldén Mast AB catalogs and brochures

  1. Furlex 50S

    2 Pages

  2. Carbon Spars

    11 Pages

  3. Furlex 500S

    2 Pages

  4. Furlex 100S

    2 Pages

  5. Keelboat masts

    28 Pages

  6. Carbon masts

    2 Pages

  7. mast section

    3 Pages

  8. Furling mast

    16 Pages

  9. FURLEX 20S

    2 Pages

  10. Rodkicker

    8 Pages

  11. SELDÉN GX

    2 Pages

  12. SELDÉN CX

    2 Pages

Archived catalogs

  1. Mats

    19 Pages