*mynauticexpo

PHS

PHS

Product catalog summary

Installation Data:
The pump can be installed indoors or outdoors and is suitable for marine and industrial environments. It is used for applications such as separation, transfer, boosting, feeding, fuel supply, and lubrication.

Operating Data:
The pump handles fluids like fuel oil (HFO, DO, LSMG0), hydraulic, and lube oils with a viscosity range from 1.2 to 5000 cSt. The pump speed ranges from 750 to 3600 rpm, with a standard clockwise rotation (counterclockwise available on demand).

Technical Characteristics:
The flow rate is up to 170 LPM (10.2 M3/h), with suction pressure from -0.5 to 10 bar and delivery pressure up to 16 bar. The operating temperature range is from 0 to 150°C. The pump features a mechanical seal, radial ball bearings lubricated for life, and can be mounted horizontally or vertically. Special versions are available for inlet and outlet connections.

Materials:
The casing and flanges are made of Cast Iron GGG40, screws are nitrided steel, and O-rings are Viton®. Surface protection is available on demand.

Assembly and Spare Parts:
The document lists various pump components and indicates which are included in the basic and superior spare parts kits.

Performance Chart:
The delivery flow is calculated at 25 cSt and 6 bar from 1,500 RPM to 3,600 RPM, with detailed performance charts provided.

Dimensions:
Dimensional charts for the assembled group are provided, with indicative dimensions.

Additional Information:
SEIM reserves the right to introduce variations without prior notice. Contact information for SEIM S.r.l. is provided for further inquiries.

Catalog excerpts

MAIN CHARACTERISTICS INSTALLATION DATA Installation Marine, Industrial Separator, transfer, booster, feeder, fuel supply, lubricating OPERATING DATA Handled fluid Fuel oil HFO - DO - LSMG0 - Hydraulic and Lube oils Viscosity range Pump speed Rotation (viewed from coupling end) TECHNICAL CHARACTERISTICS Flow rate Suction pressure Delivery pressure Operating temperature range Mechanical seal Bearing type Radial ball on main shaft Bearing lubrication Mounting arrangement Horizontal or vertical mounting Inlet & Outlet connection Special version MATERIALS Casing/Flanges Nitrided steel Surface protection...

Open the catalog to page 2

ASSEMBLY AND SPARE PARTS Pump shaft (**) Seeger ring (**) Shim spacer (**) Valve packing ring Seeger ring (**) Screw plug Seeger ring (**) Obturator valve Central screw ring (**) Screw plug Shim spacer (**) Seeger ring (**) Mechanical seal (*) Seeger ring Flat seal (*) Flat seal (*) Hexagonal socket head screw Seal holder-ring Side screw Anti-rotation element Closing plate (*) Spare parts kit Basic - (**) Spare parts kit Superior

Open the catalog to page 3

Delivery Flow [l/min ] - [ m /h ] Delivery Flow is calculated at 25 cSt and 6 bar from 1.500 RPM to 3.600 RPM PERFORMANCE CHART

Open the catalog to page 4

MPV Series FLOW METER CIRCULATING PUMP WHERE and HOW a PHS pump CAN BE FOUND PDP Series (+PHS) FEED PUMPS SEPARATOR PUMP 2SP Series STRIPPING PUMP RANSFER PUMP 2SP LS WTG Series CARGO PUMP

Open the catalog to page 5

PERFORMANCE CHART PUMP SIZE

Open the catalog to page 6

PERFORMANCE CHART

Open the catalog to page 7

PERFORMANCE CHART PUMP SIZE

Open the catalog to page 8

DIMENSIONAL CHART FOR ASSEMBLED GROUP (mm) * Indicative dimensions

Open the catalog to page 10

SEIM MANUFACTURING PROGRAM INCLUDES ALSO:

Open the catalog to page 11

SEIM S.r.l. Via Volta, 17 20090 Cusago - Milano - Italy Tel. +39 02 903 92 11 Fax +39 02 903 921 41 www.seim.it e-mail: [email protected] Informations included in this catalogue are indicative, SEIM reserves the possibility to introduce variations without prior notice.

Open the catalog to page 12

PHS

PHS

Catalog excerpts

All SEIM catalogs and brochures