1. Catalogs
  2. Seawind Catamarans
  3. Seawind 950 Standard Specification

Seawind 950 Standard Specification

Seawind 950 Standard Specification

Seawind 950 Standard Specification

Product catalog summary
Specifications:
The Seawind 950 is a luxury yacht with an overall length of 9.5 meters (31 feet), a beam of 5.8 meters (19 feet), and a draft of 0.85 meters (2’7”). It has a displacement of 4.5 tons (7165 lbs) and is equipped with single helm cable steering. The yacht is powered by two 9.9hp Yamaha high thrust outboards, with a fuel capacity of 150 liters (40 US gallons) and a fresh water capacity of 250 liters (66 US gallons).
Standard Specifications and Equipment:
  • General: The yacht is designed to meet luxury world standards, using high-quality equipment throughout.
  • Exterior/Laminate: Features a gelcoat finish with a non-slip surface and a vinyl ester resin hull laminate.
  • Hardtop: Includes a fiberglass hardtop with toughened glass windows.
  • Mast/Boom/Sails: Equipped with a clear anodized mast and boom, single spreader rig, and various halyards and reefing lines.
  • Deck Equipment: Includes multiple hatches, mooring cleats, and a manual bilge pump.
  • Centre Cockpit: Features a dining table that converts into a double bed and upholstered cushions.
  • Forward Beam, Catwalk, and Trampolines: Includes a painted forward beam and a foam-sandwich fiberglass catwalk.
  • Aft Beam and Deck: Features an anodized aft beam and a mainsail sheet system.
  • Rudder System: Includes a stainless steel steering wheel with cable-linked steering.
  • Interior Finish: European Beech trim with high gloss finishes and carpeted cabin soles.
  • Galley: Equipped with a 2-burner LPG stove, stainless steel sink, and ample storage.
  • Sleeping Cabins: Includes solid doors, upholstered mattresses, and lined cabins.
  • Head: Features a manual toilet, sullage tank, and fresh water shower.
  • Lighting/Electrical System: Custom electrical switch panel, heavy-duty batteries, and individual cabin lighting.
  • Plumbing/Fresh Water Tanks: Fiberglass freshwater tank with a Jabsco pump and bronze fittings.
  • Navigation Equipment: Includes steering compasses and Raymarine Tridata for log, speed, and depth.
  • Engines: Twin Yamaha 9.9hp engines with remote electric start and dual controls.
  • Anchoring/Mooring: Primary anchor system with a manual winch and mooring lines.
  • Antifouling/Striping: Epoxy barrier coat with decorative striping.
Disclaimer: Specifications are subject to change at Seawind Catamaran’s discretion.
See more

Catalog excerpts

Seawind 950 Standard Specification-1

SEAWIND 950 SPECIFICATIONS Overall Length 9.5 m / 31ft Beam 5.8 m / 19ft Draft 0.85 m / 2’7” Displacement 4.5 Ton / 7165lbs Steering Single Helm Cable Steering Motors 2 x 9.9hp Yamaha High Thrust Outboards Fuel 150 litres / 40 US Gallons Fresh Water 250 litres / 66 US Gallons

 Open the catalog to page 1
Seawind 950 Standard Specification-2

Seawind 950 Specifications May 2011 STANDARD SPECIFICATIONS AND EQUIPMENT. (ADDENDUM 1) 1. GENERAL: The overall finish of the Seawind 950 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout The overall aim is for a level of construction, workmanship, equipment, fitout and style comparable to the best boats available in the market at this price range. 2. EXTERIOR/LAMINATE: Finish: Gelcoat finish with moulded-in non-slip surface on deck areas. Hull Laminate: Vinyl Ester resin is used in manufacture of the hulls for the...

 Open the catalog to page 2
Seawind 950 Standard Specification-3

Seawind 950 Specifications • • May 2011 1 x Anchor roller under deck. Permanent stowage position for 35lb Plough (CQR type) anchor. (cheeks 75mm high). Catwalk in foam-sandwich fibreglass. Supported by aluminium frame 100mm x 50mm. 8. AFT BEAM AND DECK: • Anodised aft beam. • Mainsail traveller track, traveller car and 3:1 traveller controls. • 8 to 1 Mainsail sheet system - Ronstan blocks. 9. RUDDER SYSTEM: • 1 X 26” stainless steel steering wheels. • Cable linked steering. 10. INTERIOR FINISH: • European Beech trim interior. • Cabin top lined with frontrunner carpet and vinyl. • Common area...

 Open the catalog to page 3
Seawind 950 Standard Specification-4

Seawind 950 Specifications May 2011 14. LIGHTING/ELECTRICAL SYSTEM: • Custom made electrical switch panel with circuit breakers. • Tinned wire used throughout. • 2 x heavy duty 120 AH batteries. • 230amp heavy duty isolation switch. • All cabins with individual lighting. • Galley/saloon area - 2 x fluoro lights. • Diffused lights over aft deck - 2 lights. • Centre cockpit lighting. 15. PLUMBING / FRESH WATER TANKS: • Fibreglass freshwater tank. 250 litres total. External filler at mast base. • “Whale” system colour-coded piping throughout. • Jabsco fresh water pump with filters. • Bronze through-hull...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.