Seawind 1250 Platinum XPAC Standard Specifications

Product catalog summary

Overview: The Seawind 1250 Platinum XPac is a luxury catamaran designed to meet high standards of construction, workmanship, and style. It features a 3-cabin layout with options for galley up or down configurations.

Specifications: The yacht measures 41ft in length with a beam of 22'44" and a draft of 3'8". It has a displacement of 18,165 lbs and is powered by twin 29hp Yanmar diesel sail drives. Fuel capacity is 126 US gallons, and fresh water capacity is 185 US gallons.

Exterior and Laminate: The hulls and decks are full female moulded with a gelcoat finish. The laminate uses Vinyl Ester resin for the hulls and polyester resin elsewhere, adhering to Australian and International Survey Standards.

Mast/Boom/Sails: Features include an anodised aluminium mast and boom, fully battened mainsail, self-tacking headsail, and a Profurl headsail furler. All halyards and reefing lines are led back to the cockpit.

Deck Equipment: Includes aluminium hatches, fibreglass deck hatches, cockpit storage, and electric sheet winches. High-quality stanchions and rails meet Australian survey requirements.

Interior Finish: Options for polished beech or ash laminate interiors. Floors are simulated teak with holly inlay, and cabins are carpeted.

Saloon and Galley: The saloon features a polished timber dining table and upholstered settee. The galley includes a three-burner LPG stove, double bowl sink, and a refrigerator.

Sleeping Cabins: The yacht offers queen-sized beds in the forward cabins and a double bed in the aft cabin, all with quilted foam mattresses.

Heads: Both port and starboard heads have manual toilets with holding tanks, vanity basins, and shower facilities.

Lighting/Electrical System: Equipped with a high-quality DC electrical switch panel, LED lighting, and a battery system comprising AGM deep cycle batteries.

Plumbing: Features a pressure hot and cold water system, electric bilge pumps, and a watermaker capable of producing 54 liters per hour.

Engines: Powered by twin Yanmar 30hp saildrive diesel engines with fresh water cooling and dual teleflex engine controls.

Navigation: Includes Raymarine AIS Receiver, Autopilot, Chartplotter, and VHF radio.

Anchoring/Mooring: Equipped with a Muir Cougar electric anchor winch and a 45 lb CQR anchor with 55 meters of chain.

Antifouling/Striping: The yacht is protected with an epoxy barrier coat and high-quality antifouling paint.

Disclaimer: Specifications are subject to change at Seawind Catamaran's discretion.

Catalog excerpts

Seawind 1250 Platinum XPAC Standard Specifications-1

PLATINUM XPAC Overall Length Underwing Clearance Steering Twin Helms Diesel Sail Drives Fresh Water 3 Cabin Galley Down Cable Steering

Open the catalog to page 1

Seawind 1250 Platinum XPAC Standard Specifications-2

Seawind 1250 Platinum XPac Specifications STANDARD SPECIFICATIONS AND EQUIPMENT -3 Cabin Platinum XPac Version THESE SPECIFICATIONS MAY BE REPLACED / UPGRADED BY ITEMS LISTED IN ADDENDUM 2. 1. GENERAL: The overall finish of the Seawind 1250 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout. The overall aim is for a level of construction, workmanship, equipment, fitout and style that surpasses any other comparable catamaran available in the market at this price range. Finish: Full female moulded hulls 6 decks, exterior...

Open the catalog to page 2

Seawind 1250 Platinum XPAC Standard Specifications-3

Seawind 1250 Platinum XPac Specifications Moulded fibreglass Targa Bar with curved mainsheet track. Stainless steel framed slatted seats behind aft beam. Fibreglass top table between seats. Stainless steel dinghy davits shall be fitted. Forward deck cushions and back rests (removable) shall be fitted. Twin raised helm stations (dual) with hinging backrests Vinyl Upholstered: 2 X 32" stainless steel steering wheels. Both wheels independently linked to steering system. - system offers back-up redundancy. Helm seats with ice box under port side and storage under starboard side. Choice of Polished...

Open the catalog to page 3

Seawind 1250 Platinum XPAC Standard Specifications-4

Seawind 1250 Platinum XPac Specifications Toilet roll holder, towel rack 6 mirror mounted. High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display. Marine grade tinned electrical wiring with extensive use of heat sealed connectors.. Batteries x 3 comprising: House System (400 amp hrs) : 2 x 200 amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery - 700 CCA AGM. 230amp heavy duty isolation switch. Battery Charger / Inverter - Mastervolt 100amp / 200W 12 V lighting : Numerous 12V LED interior lamps and courtesy...

Open the catalog to page 4