Hydraulic Steering Systems For Inboard Motors
32Pages

{{requestButtons}}

Catalog excerpts

Hydraulic Steering Systems For Inboard Motors - 4

INTRODUCTION LS Hydraulic Steering Systems Our hydraulic steering systems are perfectly adapted to outboard and inboard motor boats and pleasure, sporting, fishing and commercial applications and to monohull and multihull sailing-boats. They are easy to install, state of the art machine finished and made to resist a marine environment. You can easily select the best suited system for your boat within a range of more than 20 pumps and 30 cylinders which will provide efficiency, reliability and smoothness. Our systems carry a 2 year warranty and our range of cylinders for fishing and work...

Open the catalog to page 4
Hydraulic Steering Systems For Inboard Motors - 5

© Manual pump ® Port circuit Tubing © Starboard circuit Tubing 4 Power pack © By-pass valve © Cylinder © Tiller arm When the helm is turned to starboard, the pump (1) sucks the oil from the port circuit (2) and pushes it back into the starboard circuit (3), thus driving the cylinder rod (6) which in turn displaces the rudder or motor. The cylinder body (6) is fixed to the boat.

Open the catalog to page 5
Hydraulic Steering Systems For Inboard Motors - 6

SELECTION OF A HYDRAULIC STEERING SYSTEM • For boats fitted with a rudder with speed not exceeding 25 knots, the torque of the rudder or rudders is calculated according to following formula and corrections. It must be known that the torque necessary to manoeuvre a boat depends on: - the speed of the water flowing on the surface of the rudder at a certain angle, - the rudder size, - the total sweep of the rudder (and part of the boat), if the rudder stock is not perpendicular, - the compensating surface of the rudder. Torque Calculation Formula for Speed below 25 Knots C = S x [ (0.4 Lg) -...

Open the catalog to page 6
Hydraulic Steering Systems For Inboard Motors - 7

HYDRAULIC STEERING SYSTEMS ASSEMBLING DIAGRAMS OF HYDRAULIC STEERING SYSTEMS Single station + lock valve Single station + lock valve + Double station + lock valve Double station + lock valve power pack + power pack A – 1 pump + LV + fittings B – 1 cylinder C – 2 hoses + fittings A – 1 pump + LV + fittings B – 1 cylinder C – 2 hoses + fittings F – tees + connection fittings G – 1 power pack A – 2 pumps + LV + fittings B – 1 cylinder C – 2 hoses + fittings F – tees + connection fittings A – 2 pumps + LV + fittings B – 1 cylinder C – 2 hoses + fittings F – tees + connection fittings G – 1...

Open the catalog to page 7
Hydraulic Steering Systems For Inboard Motors - 9

2200804 Pump 20 HB with lock valve 2200807 Set of straight fittings for 0 6 mm flexible tube 2201989 Set of elbow fittings for 0 6 mm flexible tube 2200809 Set of tees for 0 6 mm flexible tube 2200986 S/Steel wheel 0 400 mm Flow rate Minimum size of tubing Weight Volume Max. Wheel diametre 2200948 Pump 26 HB with lock valve 2200021 Set of elbow fittings for 0 8 mm flexible tube 2200048 Set of straight fittings for 0 10mm inflexible tube 2200047 Set of tees for 0 8 mm flexible tube 2200046 Set of tees for 0 10 mm inflexible tube Flow rate Minimum size of tubing Weight Volume Max. Wheel...

Open the catalog to page 9
Hydraulic Steering Systems For Inboard Motors - 10

Pump type 40 HB without lock valve Pump type 40 HB with lock valve Set of straight fittings for 0 10mm flexible tube Set of straight fittings for 0 10mm inflexible tube Set of tees for 0 10mm flex. tube Set of tees for 0 10mm inflex. tube Adaptable cone + locking pin S/Steel wheel 0 500 mm Flow rate Minimum size of tubing Weight Volume Max. Wheel diametre Pump type 50 HB without lock valve Pump type 50 HB with lock valve Set of straight fittings for 0 10mm flexible tube Set of straight fittings for 0 10mm inflexible tube Set of tees for 0 10mm flex. tube Set of tees for 0 10mm inflex....

Open the catalog to page 10
Hydraulic Steering Systems For Inboard Motors - 11

2200831 VHM 26 DTP + fittings 2201994 Set of fittings for VHM 224 2200810 0 6 mm flexible tube (per metre) 2200803 By-pass for 0 6 mm flexible tube 2200003 Tiller arm LS 30 P + screws & bolts 2200017 Oil (2 litre can) Maximum torque Stroke Maximum pressure Volume Radius of tiller arm Total rudder angle Weight 2200051 VHM 28 DTP 2200123 Set of straight fittings G % for 0 8 mm flexible tube 2200049 Set of flexible tube and fittings G % 0 10 mm 2200024 0 8 mm flexible tube (per metre) 2200027 By-pass for 0 8 mm flexible tube 2200045 By-pass for 0 10 mm inflexible tube 2200003 Tiller arm LS 30...

Open the catalog to page 11
Hydraulic Steering Systems For Inboard Motors - 12

2200075 VHM 40 DTP 2200068 Set of straight fittings G V for flexible tube 0 10 mm 2200049 Set of flex. tubes & fitt. GV 010 mm 2200070 Flexible tube 0 10 mm per metre 2200067 By-pass for flex. tube 0 10 mm 2200045 By-pass for inflex. tube 0 10 mm 2200499 Tiller arm LS 75 P + screws & bolts 2200017 Oil (2 litre can) Maximum torque Stroke Maximum pressure Volume Radius of tiller arm Total rudder angle Weight 2200496 VHM 40 DTP C254 2200049 Set of flex. tubes & fitt. GV 010 mm 2200045 By-pass for inflex. tube 0 10 mm 2200533 Tiller arm LS 105P + screws & bolts 2200017 Oil (2 litre can) Maximum...

Open the catalog to page 12
Hydraulic Steering Systems For Inboard Motors - 14

Set of tees for 0 12 mm inflex. tube Wooden wheel 0 600 mm Set of tees for 0 12 mm inflex. tube Wooden wheel 0 700 mm 2200194 Pump 70 CT without lock valve 2200088 Pump 70 CT with lock valve 2200089 Set of straight fittings for pump G 3/8 0 12 mm 2200102 2200175 0 12-17 fittings available on request 2200494 Pump 90 CT without lock valve 2200489 Pump 90 CT with lock valve 2200089 Set of straight fittings for pump G 3/8 0 12 mm 2200102 2200998 0 12-17 fittings available on request Flow rate 70 cc//t 4.27 cu.in Minimum size of tubing 10x12 mm .39"x.47" Flow rate 90 cc//t 5.5...

Open the catalog to page 14
Hydraulic Steering Systems For Inboard Motors - 15

CYLINDERS 2200093 VHM 45 DT C228 2200096 Set of flexible tube and fittings G 3/8 0 12 mm 2200097 By-pass for 0 12 mm inflexible tube 2200098 Tiller arm LS 105 + screws & bolts 2200017 Oil (2 litre can) On request: 0 12-17 fittings, flexible tube and by-pass 2200094 VHM 60 DT 2200096 Set of flexible tube and fittings G 3/8 0 12 mm 2200097 By-pass for 0 12 mm inflexible tube 2200099 Tiller arm LS 155 + screws & bolts 2200017 Oil (2 litre can) On request: 012-17 fittings, flexible tube and by-pass 2200095 VHM 60 DT C300 2200096 Set of flexible tube and fittings G 3/8 0 12 mm 2200097 By-pass...

Open the catalog to page 15
Hydraulic Steering Systems For Inboard Motors - 16

2200109 Set of flexible tubes and fittings G y2 0 18 mm 2200015 By-pass for 0 18 mm inflex. tube 2200113 Tiller arm LS 550 - 840 + screws & bolts 2200017 Oil (2 litre can) On request: 015-21 fittings, flexible pipe and by-pass Maximum torque Stroke Maximum pressure Volume Radius of tiller arm Total rudder angle Weight 2202699 VHM 90 DT 2200109 Set of flexible tubes and fittings G y2 0 18 mm 2200015 By-pass for 0 18 mm inflex. tube 2200113 Tiller arm LS 550 - 840 + screws & bolts 2200017 Oil (2 litre can) On request: 015-21 fittings, flexible pipe and by-pass Maximum torque Stroke Maximum...

Open the catalog to page 16

All Seaview catalogs and brochures

  1. DRAIN PLUGS

    2 Pages

  2. CABLE SEALS

    2 Pages

  3. KiwiGrip

    2 Pages

  4. PYI

    16 Pages

  5. R&D Marine

    20 Pages

  6. Sonihull

    12 Pages

  7. Velox Plus

    2 Pages

  8. FLIR

    1 Pages

  9. simrad

    2 Pages

  10. sea tel

    2 Pages

  11. KVH

    2 Pages

  12. garmin

    2 Pages

  13. SM-18R

    1 Pages

  14. seaview pods

    1 Pages

  15. sail pod

    2 Pages

  16. POD-FL-CORE

    1 Pages

  17. POWER PODS

    2 Pages

Archived catalogs