Catalogs >
Seatronx >
SEA-R20L100-RKA2ML_DM

SEA-R20L100-RKA2ML_DM
2Pages

Catalog excerpts

20.1 " Military Grade Console Display » Features & Benefits ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Model Name: R20L100-RKA2ML Certified with MIL-STD 810G Certified with MIL-STD 461E LED Backlight Panel High Image Quality Resolution up to 1600 x 1200 pixels Wide View Angle Display for ± 89 degrees Anti-Corrosion Housing / Fanless Standard AR Glass EMI ITO Mesh Filter Glass built-in (optional) 5 Wire Resistive Touch Screen with EMI Mesh Coating (optional) Flush Rack /Rack Mount Mechanical Design Convenient On-Screen Display Controls AC Power built-in / Optional 9~36V isolation DC in Built-in Light Sensor for auto brightness control Military Grade Power Connector (MIL-DTL-38999/1) Operating Temperature -0°C to 60°C Wide temperature solution by request Storage Temperature -10°C to 70°C » Technical Specifications Display Specifications Model Name Active Display Area Pixel Pictch Brightness Viewing Angle Contrast Ratio Response Time Display Colors Synchronization Range Input Interface Recommended Resolution Power Source Power Consumption Power Management Plug & Play Dimming Range Light Sensor RS232 Remote Control Glass EMI ITO Glass Touch Screen EMI Mesh Touch Screen Optical bonding SEA-R20L100-RKA2ML 408.0(H) x 306.0(V) mm 0.255(H) x0.255 (V) mm 300 cd/m2 Optional up to 400 cd/m2 (typical) -89~89 (H); -89~89(V) 800:1 14 ms (typical) 16.7 Million (8 bits/colors) Horizontal: 31.5~80.0kHz Vertical: 60~75 Hz 15 pin D-Sub, 5 x BNCs, DVI-D, RS232 1600 x 1200 @60Hz AC 100~240V, Universial ± 10% DC 9~36V ± 10% (Optional) 90W Typical, normal operation VESA DPMS Compliant VESA DDC 1/2B 0~100 % Yes (default) Optional Yes (default) Standard Anti Reflective Glass Optional, Transmittance 88% Optional, 5 Resistive Touch Screen Optional, 5 Resistive Touch with EMI Mesh Filter MOQ required » Ordering Information Part Number R20L100-RKA2ML/GS R20L100-RKA2ML/ITO R20L100-RKA2ML/ATR R20L100-RKA2ML/ATR-ITO Description Anti-Reflective Glass (Default) ITO EMI shielding Glass * ELO 5 wired Resistive Touch Sensor (RS232 Interface) ELO 5 wired Resistive Touch with EMI Mesh Filter *To have MIL-STD-461E Compliance, it shall have EMI -ITO Glass or Touch with EMI Mesh Filter » Accessories Part Number 1. Military Grade 3 Pin Power Connector (conn. Type JY27466) 2 Meter 2. Military Display Quick Installation Guide (Paper) 3. Touch Driver CD (Optional) 4. DVI Shielding Cable 1.8 Meter 5. VGA Sheilding Cable 1.8 Meter 6. Touch RS232 Sheilding Cable 1.8 Meter (Optional) 7. RS232 Remote Control Sheilding Cable 1.8 Meter (Optional)

Open the catalog to page 1

» Military Grade EMC Compliance » Military Grade Environmental Compliance EMC (MIL-STD 461E/F Compliance) * EMC Test Spec Frequency Range Environmentals (MIL-STD 810F/G Compliance) Built-in EMI ITO Glass or Mesh Film Touch Sensor 30°C to 60°C, 95 ± 2% RH, Method 507.5 Operating 15,000 ft, Method 500.5 / Procedure II Storage 15,000 ft, Method 500.5 / Procedure I Method 509.5 5 ~ 500 Hz, 1.48 & 1.90 & 2.24 Grms Method 514.6 / Procedure I Method 516.6 / Procedure IV Method 516.6 / Procedure I Low Pressure Salt Fog Vibration Transit Drop Shock Conducted Emissions Conducted Emissions Conducted...

Open the catalog to page 2

SEA-R20L100-RKA2ML_DM 2Pages

Catalog excerpts

All Seatronx catalogs and brochures

SEA-R20L100-RKA2ML_DM
2Pages